Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Cast Boot lenght

profile picture
niklas123
Posts: 37 - Karma: 183
Is there a minimum boot sole lenght for Cast to fit the brake lock and risers between the two parts of the binding? My boots are 293mm long
Dec 7 2023 5:40AM
1 0
profile picture
cndr
Posts: 159 - Karma: 854
You'll be fine.
Dec 7 2023 7:56AM
2 0
profile picture
hamsauce
Posts: 289 - Karma: 2,557
youl be fine. i just measured the space left in mine. I have a 325 BSL and there was around 70mm of space between the front of the climbing riser and the back of the toepiece. Plus if all else fails, the shop could adjust the heelpiece to be furthest forward, thus allowing them to put the heelpiece a few mms back than normal. I would guess that in theory it would be able to go down to a 250 BSL

**This post was edited on Dec 7th 2023 at 11:51:23am
Dec 7 2023 11:50AM
0 0
profile picture
FaunaSkis
Posts: 608 - Karma: 6,579
This is my cast set up for a 306mm BSL. There’s easily 40mm extra space between the toe and the climbing bales.
Dec 7 2023 4:33PM
0 0
profile picture
niklas123
Posts: 37 - Karma: 183
Thanks for the replys. Will get them mounted on a pair of armada 116 ul tomorrow.
Dec 7 2023 5:35PM
0 0
All times are Eastern (-5)