Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What if I used 2 bindings?

profile picture
piss.boy
Posts: 1491 - Karma: 10,615
if I were to put for example a attack toe with a pivot heel or vise versa would there be any real issues other then looking funky and maybe some weird release paterns? Idk why anyone would actually do this but It was a brain child of mine in physics class.
Oct 14 2021 11:11PM
12 0
profile picture
KCoCM
Posts: 963 - Karma: 8,781
i think the stack height differences would make it so forward pressure calibration was fucked up
Oct 14 2021 11:18PM
14 0
profile picture
SendyMcSendyface
Posts: 2453 - Karma: 20,000
Piss_Boyif I were to put for example a attack toe with a pivot heel or vise versa would there be any real issues other then looking funky and maybe some weird release paterns? Idk why anyone would actually do this but It was a brain child of mine in physics class.


May work if the stack height can be made the same, but only then.
Oct 14 2021 11:19PM
2 0
profile picture
Deez_Mcskis
Posts: 382 - Karma: 3,784
You never know whether its genius or stupidity until you try.

That said, don't end up in the hospital because the bindings wouldn't release or sum
Oct 14 2021 11:28PM
3 0
profile picture
ReturnToMonkey
Posts: 6172 - Karma: 66,444
Honestly the physics of most bindings are similar enough these days where I don't see any problem with this as long as you thoroughly test them at a low din low speed to make sure they release right. Dont crank your din either. It would be a cool experiment. I take no responsibility for any damage or injury...
Oct 15 2021 1:08AM
6 0
profile picture
north_coast
Posts: 52 - Karma: 2,798
my dad told me they used to sell toes and heels separately, and that he used to ride look toes and marker heels for racing. keep in mind this was back when your average binding was about as reliable as duck tape though, and nothing was standardized to begin with so the differences didn't matter.
Oct 15 2021 2:01AM
11 0
profile picture
piss.boy
Posts: 1491 - Karma: 10,615
Last night I didn't even wanna do this bit now. Now I do
Oct 15 2021 8:04AM
5 0
profile picture
FaunaSkis
Posts: 592 - Karma: 6,490
The problem you might have (especially using pivot heels) is that you will struggle to get the toes and heels in the right place to suit the adjustment range for getting forward pressure right, and getting your boot centre where you want it.

Also different stack heights between the different brands may cause issues as if the difference is too much, your boot won't interact with the contact points as they should, affecting your release.
Basically it's highly ill-advised.
If you do decide to go ahead (and you're friendly with a shop with the machine) you could get the release tested to satisfy yourself, but forget any idea of anybody else taking responsibility if you get hurt.
Oct 15 2021 9:12AM
3 0
profile picture
johnblaze
Posts: 1432 - Karma: 2,442
I have a mash up of 3 different bindings on my street skis and they work fine. Probably wouldn't use them on the hill though.
Oct 15 2021 10:39AM
4 1
profile picture
piss.boy
Posts: 1491 - Karma: 10,615
johnblazeI have a mash up of 3 different bindings on my street skis and they work fine. Probably wouldn't use them on the hill though.


Put a picture I wanna see that
Oct 15 2021 10:40AM
7 0
profile picture
DesertStix
Posts: 2540 - Karma: 14,971
3 pivot pieces or like three entirely different binding systems?
johnblazeI have a mash up of 3 different bindings on my street skis and they work fine. Probably wouldn't use them on the hill though.
Oct 15 2021 12:44PM
1 0
profile picture
FruitBootPro
Posts: 2990 - Karma: 12,905
This is some 900 IQ shit fr
Oct 15 2021 3:48PM
1 1
profile picture
johnblaze
Posts: 1432 - Karma: 2,442
DesertStix3 pivot pieces or like three entirely different binding systems?


It's a bunch of different old salomons.
Oct 18 2021 10:59AM
1 0
profile picture
johnblaze
Posts: 1432 - Karma: 2,442
Piss_BoyPut a picture I wanna see that


Will try to remember when i get home
Oct 18 2021 11:00AM
1 0
profile picture
Baddog
Posts: 1 - Karma: 12
When I on World Cup Circuit we used to experiment with this. No advantage. Toes and heels are designed to work as a system together. When you change out one of the components, you are then changing the way the system is designed to work (and not for the better). Specifically, we tried Tyrolia and Solomon toes with Marker heels. Just a bunch of pre-releases when we didn't want them, so we would crank up the DIN so high to stay on that any advantage we where trying to achieve was lost.

When at the Tyrolia factory we discussed this with the techs and they were of the same opinion.
Nov 6 2021 2:48PM
0 0
profile picture
DesertStix
Posts: 2540 - Karma: 14,971
BaddogWhen I on World Cup Circuit we used to experiment with this.

/claim
Nov 6 2021 5:33PM
3 0
All times are Eastern (-4)