Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Super Glue to fix top sheet chipping ?

profile picture
BCASSASSIN
Posts: 1330 - Karma: 37
I've heard yes and no and was curious to hear from some people who actually know.  On general top sheet chipping specifically on the sides is it ok to use super glue to stop water from getting in ?  I've heard it eats the sealant and I've heard it doesn't and heard some stuff in between so any help would be greatly appreiated.  +k for any answers
Sep 24 2011 5:59PM
1 0
profile picture
Blurst
Posts: 13577 - Karma: 10,168
just go to a shop
Sep 24 2011 7:36PM
0 0
profile picture
LAME.
Posts: 5795 - Karma: 2,449
ya
Sep 24 2011 7:52PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
superglue is also super brittle, epoxy is a better fix, sand up the spot that chipped off , clean of dust with clean rag, mix epoxy, apply epoxy royaly, let it cure 24h
then take a file and sandpaper to tune off excess epoxy and smoothen it out....

besides that, topsheet chippings aren't usually down to the wood, so your ski will probably still be "dry" even with topsheet chips ....
Sep 24 2011 8:08PM
0 0
profile picture
SKIU4EA
Posts: 2387 - Karma: 2,072
this is usually the case.  Plus, I think it looks sick having a bunch of minor chips and dings along the topsheet.  As long as it doesn't compromise the ski.  It might even discourage someone from snatching them up.
Sep 24 2011 8:21PM
0 0
profile picture
BCASSASSIN
Posts: 1330 - Karma: 37
Thanks for the help, that makes a lot of sense.  +K for your time gentlemen
Sep 24 2011 8:48PM
0 0
profile picture
gotti
Posts: 4269 - Karma: 4,548
Top sheet chipping is really nbd ya some epoxy will fix it but you look so much tougher, more rugged and just all around more of a man so rip em off and as long as they dont go down to the wood, ur good!
Sep 24 2011 8:57PM
1 0
profile picture
jon@wh2o
Posts: 314 - Karma: 158
This. and get maraine epoxy, its the heaviest duty, flexible and waterproof.
Sep 24 2011 11:51PM
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,893
Marine epoxy right? That's a good call. I've never tried that but would agree that it is probably the best. May be tough for me to find in Colorado.
Sep 25 2011 12:06AM
0 0
profile picture
jon@wh2o
Posts: 314 - Karma: 158
haha ya, marine epoxy. Saved my pair of salomons that were chipped to shit. You should be able to get it in any decent hardware store no problem
Sep 25 2011 2:19AM
0 0
profile picture
B.Aussie
Posts: 5851 - Karma: 4,522
I got a chip on the side wall right down to the wooden core and my shop sealed it, epoxied the hole and then painted over it for me. Worked a treat, you could hardly see it.
Sep 25 2011 8:14AM
0 0
profile picture
SteezoSaurus
Posts: 2630 - Karma: 2,670
If your going to be doing this epoxy job yourself you may want to consider this step. Be sure to get two metal scrapers and a small clamp. Once you set the epoxy down on the ski, you will want to sandwich the ski between the two scrapers and then clamp it for 24 hours. This will ensure that the epoxy sets in the ridges and valleys of the chipping sidewall.
Sep 25 2011 8:23AM
0 0
profile picture
Newschool_Pope
Posts: 2473 - Karma: 267
the more it chips, the less swingweight it will have. be happy.
Sep 25 2011 8:44AM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
otherwise, go for slow curing epoxy....

fast curing epoxy has a tendency to become quite brittle while the slower curing variants tend to remain a bit more flexible and therefore absorb impacts better ...
Sep 25 2011 10:55AM
0 0
profile picture
ParabolicSidecut
Posts: 100 - Karma: 158
Marine-grade epoxy for top sheet issues, JB weld for blown-out side walls and also base damage if you're cheap. If you've got an extra 30 bucks lying around and enjoy having fast skis, have a shop base-weld your core shots.
Sep 25 2011 11:40AM
0 0
profile picture
goodiepocket
Posts: 950 - Karma: 640
epoxy if you really want to spend the time to fix it, otherwise I have just dripped black p-tex..seems to work alright
Sep 25 2011 1:42PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
ptex is for base repairs only....

that's like fixing your car bumper with ducttape and saying it's a good fix for as long as it holds up ....
Sep 25 2011 1:54PM
0 0
profile picture
goodiepocket
Posts: 950 - Karma: 640
I've never seen a label saying p-tex is for 'base repairs only'. OP is talking about using super glue...what's wrong with using p-tex? as I said if you have the time of course use epoxy (add some pigment if you have any to help match colors), but for an easy fix..why not? if the top sheet is chipped off and you are just concerned about trying to keep water out..its a pretty fast, cheap, easy fix. am I wrong?
Sep 25 2011 4:24PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
for as far as my word is worth something to you, ptex is only good for base repairs even wood glue would be a bitter fix than ptex....

anyhow, it might help a little if applied to the topsheet, but don't let other skiers see you do it, you'll look like a fool ....
Sep 25 2011 4:44PM
0 0
profile picture
goodiepocket
Posts: 950 - Karma: 640
if the repair is simply for some small top sheet chips along the edge, I don't see what would be wrong with using ptex. especially if you have a black topsheet, unless you have pigment, it will visually look better than epoxy.

I am just giving a simple, temporary solution...
Sep 25 2011 5:10PM
0 0
profile picture
jon@wh2o
Posts: 314 - Karma: 158
It's true. especially if you were on a ski trip or something, it would seal the ski quick and cheap. My friend had a bad chip that he sealed with P-tex as a temporary thing, and it lasted him 2 seasons no problem.
Sep 25 2011 5:26PM
0 0
profile picture
whoa-dere
Posts: 10596 - Karma: 7,100
p tex is the base material that lets you slide on snow, it's not meant to be put on a topsheet. it's fine to use it but if someone finds out, they'll laugh at you!
Oct 13 2011 6:54PM
0 0
profile picture
CassiusClay
Posts: 1757 - Karma: 2
Lots of people use ptex, and it works fine for small chips.
Oct 13 2011 9:19PM
0 0
profile picture
Lemuel
Posts: 14477 - Karma: 10,515
K2 used to use ptex topsheets on the public enemies. Your argument is invalid.

I used gorilla glue for my chips that are down deep. Works fine for me. Besides, no matter what the fix, you are only gonna chip up your skis some more.
Oct 14 2011 9:16AM
0 0
profile picture
cct_222
Posts: 1526 - Karma: 141
epoxy if you wanna do it right, but if you need a quick fix right before you head to the mountain, i always use this clear coat plumbers sealant stuff and it always does the trick for the deep chips and scrapes
Oct 14 2011 10:21AM
0 0
All times are Eastern (-4)