
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
switchlip2I’ve been in the rc4 130s for the past few seasons but not the pro version you posted.
Id recommend trying to get the vaccum rc4s and then you can take them to a Fischer dealer and get then molded to your foot
BallClapperRegardless of what I get I’ll need shell work. My local shop does that and a custom insole for $200. I was under the impression that this is the same as the one you have but just with zip fit. What is the trade off?
PartyBullshiitThe pro is a 140flex.
BallClapperScary. I'm light but lengthy.
BallClapperRegardless of what I get I’ll need shell work. My local shop does that and a custom insole for $200. I was under the impression that this is the same as the one you have but just with zip fit. What is the trade off?
BallClapperScary. I'm light but lengthy.
switchlip2Fischers run pretty soft a 130 Fischer doesn’t feel that stiff so if the pro is 140 it might feel more like another brands 130
**This post was edited on Nov 3rd 2024 at 5:46:37pm
PartyBullshiitBobs has the 130 vac boa for $500.
https://www.bobleisure.com/fischer-rc4-130-mv-boa-vac-gw?number=151-9002972928536&utm_campaign=google_us&gad_source=1&gbraid=0AAAAABWx1ivDo2qbejkXQ3QCVsbaCDfvf&gclid=EAIaIQobChMImN70m5vBiQMV66RaBR3-ix9HEAQYBiABEgJjRvD_BwE
Non_State_ActorAtomic Hawx are also pretty soft if OP is comparing directly to those or coming from those, he mentioned them in the first post.
dietcoke.manI've got the vacuum molded rc4s best boots I've ever ridden. My shells are absolutely beat to shit but they still feel fine even with a couple cracks and cuts by the ankle. Replace the power straps with booster straps tho
dietcoke.manI've got the vacuum molded rc4s best boots I've ever ridden. My shells are absolutely beat to shit but they still feel fine even with a couple cracks and cuts by the ankle. Replace the power straps with booster straps tho
switchlip2If you drill little holes at the end of the crack it will make them stop cracking any further
ajbskii ski fischers and wouldnt go to anything else solely due to the shape of my foot matching fischers model pretty well. currently on my third pair of rangers. i cant say im a huge fan of the new tpu shells and cuffs. the old "vacuum" PA shells were susceptible cracking at cold temps. especially if the "vac" forming process really stretched them out in the ankles. the new urethane shells in comparison are heavier and more likely to get cut in a shear force (my shell got cut by one the buckles in walk mode).
just like others said, my 120 flex feel more like 110.
just make sure you have the right instep for a lv boot.
Non_State_ActorAtomic Hawx are also pretty soft if OP is comparing directly to those or coming from those, he mentioned them in the first post.