Dalbello Krypton 130 ID (2023) Replacement Liners

zipfit

The TRW-DD12 from intuition is the closest that they have to the ID Wrap liners.

What size liners?

I have new ID liners from the Cabrio 130 in a 26.5. There yours if you want them just pay shipping

deke_skizipfit

Tell us you didn’t read the post without telling us you didn’t read the post.

**This post was edited on Feb 21st 2024 at 10:38:43am

PartyBullshiitTell us you didn’t read the post without telling us you didn’t read the post.

**This post was edited on Feb 21st 2024 at 10:38:43am

i wasnt tryna read allat

Intuition power wrap? Thats pretty what they used in the krypton/cabrio boots up until a few years ago..

Have you tried replacing the boot boards with the rubber ones that come with the Il Moro? The hard ones are black or white and the rubber ones are orange.

They dont use power wrap, the closest fit to the ID wrap liber is the TRW-DD12

DensecloudsIntuition power wrap? Thats pretty what they used in the krypton/cabrio boots up until a few years ago..

jompcockHave you tried replacing the boot boards with the rubber ones that come with the Il Moro? The hard ones are black or white and the rubber ones are orange.

would this just be better for landings?

p.s. I have some brand new size 26.5 Dalbello liners if u wanna pay for shipping.

cabbageskierHi Everyone,
I bought a pair of Dalbello krypton 130s last year and have skied close to 100 days on them. I've been generally happy with how this boot performs but the liner is getting pretty packed out and painful in spots. They no longer sell the replacement liner for this boot anywhere. I tried throwing a pair of zipfit gara lv's in them and it was way too stiff, landings were painful. Has anyone had luck with the new intuition DH wraps in their kryptons? If so, what thickness would work?

I'm at the point where I'm just gonna get a different boot but the new Cabrio line from Dalbello doesn't fit me well/has a weird pressure point on the instep.

Any help is much appreciated.

-g

I've had good luck with the older intuition wraps (Powerwrap+ size 27 for my 26.5 krypton; I wanted a tighter fit than stock) if they were baked properly (really hot)... I recently moved to Zipfit Gara HV and like the ski performance and fit better, but miss the warmth. If you're interested in intuition, try https://intuitionliners.com/fitting-information-form/ . They'll probably take a couple days to get back to you with good advice. I'd bet they'll recommend the 9mm power wrap for stock like liner fit.

p.s. I have some brand new stock size 26.5 Dalbello liners if u wanna pay for shipping.

**This post was edited on Mar 6th 2024 at 11:03:43am

**This post was edited on Mar 6th 2024 at 11:05:51am

shedddp.s. I have some brand new size 26.5 Dalbello liners if u wanna pay for shipping.


I've had good luck with the older intuition wraps (Powerwrap+ size 27 for my 26.5 krypton; I wanted a tighter fit than stock) if they were baked properly (really hot)... I recently moved to Zipfit Gara HV and like the ski performance and fit better, but miss the warmth. If you're interested in intuition, try https://intuitionliners.com/fitting-information-form/ . They'll probably take a couple days to get back to you with good advice. I'd bet they'll recommend the 9mm power wrap for stock like liner fit.

p.s. I have some brand new stock size 26.5 Dalbello liners if u wanna pay for shipping.

**This post was edited on Mar 6th 2024 at 11:03:43am

**This post was edited on Mar 6th 2024 at 11:05:51am

I've tried the new intuition dh wrap 12mm and it put too much pressure on my instep, and fit weird in general. My bootfitter was saying the 9mm would be too thin, but might be worth a shot. I would 100% take those stock liners off your hands, I sent you a dm.

https://dalbelloboots.com/en-us/p/liner-id-max-kr - liner for the 100mm last KR and 110 flex KR are available in 26.0/26.5

**This post was edited on Apr 28th 2024 at 8:13:42pm

Hi guys, I saw this topic and decided to refresh it as I am facing similar issue as OP.

This year I decided to come back to skiing after a longer break. As I wasn't sure about how my messed up knees were going to react, I didn't want to spend too much on the equipment. This meant spending a lot of time on reading and testing different boots and waiting for a good purchase opportunity. Finally, I found a pair of second-hand Dalbello KR2 Pro ID, I think 2016. After one season with many ski days I am really happy and feeling lucky with my purchase. I only want to replace the old liners - even if maybe I could stand them being a little smelly, I also started to feel them being packed out, especially the heel parts. Also, when I wear the boots in the morning, I am able to clip them max on the first/second level on the top. After few runs with more intense carving they become loose and I am able to clip them on 4th or even 5th level. I believe my shins are quite thin and I could get liners with slightly more volume on shin area.
For now the stiffness is not an issue - I am not doing many jumps, I am focusing more on improving general skiing technique like leg rotation and edging, separation, carving, switch etc.

My shells are 26.5, I had a bit less than half inch space while fitting them without liners. The liners are original Intuition ID wrap, they were 26, but i needed to have them stretched by a bootfitter. The stiffness is OK.

I read somewhere that Intuition Plug are the closest to the original ones, however, I would prefer something with higher volume, especially for the shin part (mid or high volume, not 9mm).
I think my setup could work with the Power Wrap model. I would get it in 27 size, it is still available on Intuition website
I was also checking other Intuition models (specifically, I was curious how it would work with SBC Wrap which are 5cm taller), but it seems that other models are not available in my size.

Do you have any other suggestions what I can buy and not to spend too much? (I probably won't buy zipfits after seeing the prices. I would even prefer to buy Intuitions each year instead :) )

Also, maybe anybody still has some original liners for sale? :)

Thanks

That year Krypton is a great shell. Everyone with that shell including many pros would just use the pro wrap liner as replacement like you said. Should work well.