Member of the Month

theabortionator
May, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bases drying out quickly

profile picture
deac
Posts: 853 - Karma: 4,042
My bases dry out super fast on my poachers it's mostly underfoot I have no clue why, After 1 day of skiing my bases are dry as fuck ill show a picture when I get home but it happens on my lead ski for rails and the trailing ski doesnt get as bad but still drys out. (edit, Maybe the bases dont accept wax that well??)

**This thread was edited on Feb 15th 2024 at 12:45:47pm
a year ago
3 3
profile picture
iDontHitRails
Posts: 292 - Karma: 2,820
Where you went wrong is buying K2’s. That company cuts so many corners in the production process
a year ago
2 2
profile picture
deac
Posts: 853 - Karma: 4,042
iDontHitRailsWhere you went wrong is buying K2’s. That company cuts so many corners in the production process


fuck no ill buy poachers until i die
a year ago
2 4
profile picture
PartyBullshiit
Posts: 4719 - Karma: 20,099
Get some base cleaner. Clean the bases really well. Then do a nice hot wax and let it sit for a few days.
a year ago
10 1
profile picture
Slugger66
Posts: 149 - Karma: 981
I have a similar issue with my Chronic 94s. Does anybody know if a base grind would help?
a year ago
1 0
profile picture
Non_State_Actor
Posts: 5094 - Karma: 18,652
PartyBullshiitGet some base cleaner. Clean the bases really well. Then do a nice hot wax and let it sit for a few days.

A hotbox would be good too.
Slugger66I have a similar issue with my Chronic 94s. Does anybody know if a base grind would help?

It would certainly help, exposing a fresh layer of base material and leaving a nice structure for the wax to adhere and penetrate.
a year ago
3 0
profile picture
JFU
Posts: 92 - Karma: 733
I've found that man made snow eats the wax from my bases extremely quick (bases drying out in 2-3 days).

For context I just finished up skiing a few mountains in BC which didn't have snow making and my skis only needed a wax after approximately 10 full days of skiing, and even then the bases weren't that dry.

At my home mountain in Australia, they rely heavily on man made snow (a good 60-70% of runs have snow guns), and my bases (regardless of what temperature wax you apply) dry up real fast.

Not sure where you ski but that could be a factor.
a year ago
5 0
profile picture
deadhead420
Posts: 2110 - Karma: 18,535
PartyBullshiitGet some base cleaner. Clean the bases really well. Then do a nice hot wax and let it sit for a few days.


I prefer the hot scrape method instead of base cleaner but that's just me
a year ago
3 0
profile picture
tomatonater
Posts: 858 - Karma: 2,808
One to add, do longer slower passes down the base of the ski when you get the wax spread on. Like SLOW SLOW. Heat that base up, don't melt em though
a year ago
3 0
profile picture
midwestcoast
Posts: 235 - Karma: 2,388
Lots of things go into this, but as mentioned - make sure you have a clean base. The best way to clean is a warm weather wax and scrape while it's still warm to draw impurities outta the base. Then follow up with a good wax for whatever conditions (I prefer swix fluoro) and let dry until cool before scraping... This will bond way better. Also, you might want to make sure you have the right structure for whatever snow conditions you're on.
a year ago
2 1
profile picture
midwestcoast
Posts: 235 - Karma: 2,388
Also, extruded bases don't hold wax as well as sintered bases. Even when you go sintered, there are different grades at different price points.
a year ago
3 0
profile picture
jompcock
Posts: 1577 - Karma: 11,738
Once your bases have dried out and been skied on the pores get blocked and a base grind/some kind of reprofile is needed to allow the bases to absorb wax again. Sometimes you can get away with a light wetsand if you're in a pinch but a base grind is probably ideal.
a year ago
1 0
profile picture
PartyBullshiit
Posts: 4719 - Karma: 20,099
mrk127I prefer the hot scrape method instead of base cleaner but that's just me

Do both
a year ago
2 0
profile picture
HypeBeast
Posts: 10062 - Karma: 76,214
Are these new skis or old ones? Might be time for a base grind. Either way, hit it with a hard base renew/base prep wax. Let that shit sit overnight. Scrape, brush, etc. Then put on wax applicable to your skiing environment. Don't cheap out on wax either.

Watch some dominator Jaques videos
a year ago
1 0
All times are Eastern (-4); Currently it's 9:59PM