Member of the Month

theabortionator
April, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Pivot 12 help

profile picture
Shredsaucer
Posts: 21 - Karma: -109
https://www.newschoolers.com/videos/watch/1065887/trim-DF2D35E3-AC76-42A0-A69F-BCEAC34DDD67-MOV
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.
2 years ago
3 2
profile picture
Wadyatalkinabout
Posts: 120 - Karma: 1,474
Yeah they are complete unusable. I’ll take them off your hands for 10$
2 years ago
8 0
profile picture
Shredsaucer
Posts: 21 - Karma: -109
Shredsaucerhttps://www.newschoolers.com/videos/watch/1065887/trim-DF2D35E3-AC76-42A0-A69F-BCEAC34DDD67-MOV
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.


Sorry for the spelling errors, I was kinda in a rush
2 years ago
0 0
profile picture
lluscho
Posts: 373 - Karma: 3,479
One more twp sold is one more skier lost to social media
2 years ago
20 0
profile picture
jompcock
Posts: 1577 - Karma: 11,738
Foreword pressure might be too high. The line on the heel is a starting point, not an indicator that FP is correct. Would take back and tell them you think FP is set too high.
2 years ago
2 0
profile picture
Vish-shoe
Posts: 1949 - Karma: 14,600
Yeah, those bindings don’t work on TWPs
2 years ago
6 0
profile picture
Shredsaucer
Posts: 21 - Karma: -109
jompcockForeword pressure might be too high. The line on the heel is a starting point, not an indicator that FP is correct. Would take back and tell them you think FP is set too high.


Adjusted the forward pressure and the din a little and it stopped, thx for the tips
2 years ago
1 0
profile picture
BigmoneyMatt
Posts: 1545 - Karma: 1,215
tf u do to them dude they are ruined!
2 years ago
0 0
profile picture
jompcock
Posts: 1577 - Karma: 11,738
ShredsaucerAdjusted the forward pressure and the din a little and it stopped, thx for the tips


The official pivot guide for techs says something like 'get the white notch to match with the line and then adjust so that you can just barely rotate the heel with a boot in the binding'. It's not an exact set of parameters like Marker which basically says to tighten until the screw is flush and pull the afd to the side and then slowly lower until it can slip back to the middle on its own.

What did you change on the din?
2 years ago
1 0
profile picture
PimpChimpin
Posts: 1287 - Karma: 12,582
Send them my way I’ll fix them
2 years ago
1 0
profile picture
Shredsaucer
Posts: 21 - Karma: -109
jompcockThe official pivot guide for techs says something like 'get the white notch to match with the line and then adjust so that you can just barely rotate the heel with a boot in the binding'. It's not an exact set of parameters like Marker which basically says to tighten until the screw is flush and pull the afd to the side and then slowly lower until it can slip back to the middle on its own.

What did you change on the din?


I just tughtemsnit a little, like to 6 and they kinda just got snappier and they didn’t really move anymore. I don’t really trust it tho so I’m prob gonna take them to the shop to get checked out.
2 years ago
0 0
profile picture
lukegeyer
Posts: 126 - Karma: -2,347
bro got pivots from pandabuy lmao
Shredsaucerhttps://www.newschoolers.com/videos/watch/1065887/trim-DF2D35E3-AC76-42A0-A69F-BCEAC34DDD67-MOV
I just got my first pair of look pivots mounted to my twp and I got home and out the boot in and something seems off. Is this supposed to happen or is something wrong with the heal piece, does it need tightens, ect. Someone pls tell me.
2 years ago
2 1
All times are Eastern (-4); Currently it's 1:06PM