Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Catching an edge on boxes?

profile picture
DonWillster
Posts: 0 - Karma: 19
Hi friends,

Today I was successfully sliding all of the boxes at the small park and decided to head over to the bigger features. I was doing well so I decided to try an elevated box feature. I landed successfully but about halfway through the feature, the inner edge of my back ski caught and I flailed forward into oblivion. No injuries but I am curious what happened? I have a pair of new armada arv 96s and it was raining/snowing wet.. Do these conditions make the box stickier? I was really happy with my progress and now I am hesitant to jump on a box. I would prefer not to dull my edges if possible. Thoughts?

Edit: I was sliding sideways not 50-50

**This thread was edited on Apr 8th 2022 at 10:19:27pm
Apr 8 2022 10:18PM
5 0
profile picture
dynafitdaffy
Posts: 61 - Karma: 516
It’s hard to learn (I’m learning too) but I think you have to keep those edges up slightly, and make sure your detune is legit. Boxes have more sliding surface than rails so you’re more likely to catch on a slide. Something that helps me is skiing without poles so I can catch myself with my arms easier if I fall.
Apr 8 2022 10:29PM
3 1
profile picture
dynafitdaffy
Posts: 61 - Karma: 516
dynafitdaffyIt’s hard to learn (I’m learning too) but I think you have to keep those edges up slightly, and make sure your detune is legit. Boxes have more sliding surface than rails so you’re more likely to catch on a slide. Something that helps me is skiing without poles so I can catch myself with my arms easier if I fall.


By “edge” I mean front edge, and by “detune” I mean file your new ski edge so it’s dull and won’t catch as easy
Apr 8 2022 10:30PM
1 0
profile picture
_AM_
Posts: 9 - Karma: -23
Don’t worry about your edges
if you want to get good at skiing you cant be scared to break some things
Apr 8 2022 10:52PM
1 9
profile picture
Toopexd
Posts: 24 - Karma: 287
Just detune please, your skis will thank you…
Apr 9 2022 12:00AM
13 0
profile picture
BigmoneyMatt
Posts: 1545 - Karma: 1,182
DonWillsterHi friends,

Today I was successfully sliding all of the boxes at the small park and decided to head over to the bigger features. I was doing well so I decided to try an elevated box feature. I landed successfully but about halfway through the feature, the inner edge of my back ski caught and I flailed forward into oblivion. No injuries but I am curious what happened? I have a pair of new armada arv 96s and it was raining/snowing wet.. Do these conditions make the box stickier? I was really happy with my progress and now I am hesitant to jump on a box. I would prefer not to dull my edges if possible. Thoughts?

Edit: I was sliding sideways not 50-50

**This thread was edited on Apr 8th 2022 at 10:19:27pm


Don't be a retard and you won't catch an edge. Simple as straight up every dude I've seen catch edge is a retard.

But hey if you want a serious tip just take an angle grinder to the edge of your skis, don't worry they'll be sparking but just get in there good, way quicker then using a file.
Apr 9 2022 12:11AM
2 16
profile picture
BigmoneyMatt
Posts: 1545 - Karma: 1,182
dynafitdaffyBy “edge” I mean front edge, and by “detune” I mean file your new ski edge so it’s dull and won’t catch as easy


Nahh bruh angle grinder is where it's at trust I ain't never caught an edge in my life
Apr 9 2022 12:12AM
5 2
profile picture
dynafitdaffy
Posts: 61 - Karma: 516
DeadBNahh bruh angle grinder is where it's at trust I ain't never caught an edge in my life


Oh man I gotta try that
Apr 9 2022 1:37PM
1 0
profile picture
dwt802
Posts: 3058 - Karma: 29,863
These replies are garbage.

Anyways, you’re probably catching an edge because your skis are new and have sharper edges which can be really grabby on rails, especially when wet. Most people do what’s called detuning your edges, where you file the edge down to smooth it out so it will slide rails better and catch less and will prolong the skis life overall. If you just do this underfoot you will still have decent edge control skiing and sliding rails/boxes will be way better.

**This post was edited on Apr 9th 2022 at 8:24:54pm
Apr 9 2022 8:23PM
7 0
profile picture
Christian_Bale
Posts: 1663 - Karma: 18,292
What dwt802 said. But even with duller edges you might still end up sticking from time to time. Conditions change and sometimes rails get sticky. Having a wider, more balance stance with your knees bent can sometimes help.
Apr 9 2022 8:53PM
4 0
profile picture
tri_photo
Posts: 1530 - Karma: 7,194
honestly I prefer hitting down / flat rails to boxes any day. rails might look scarier but I've never had a scary wreck on rails, but on boxes I've seen my life flash before my eyes lol
Apr 9 2022 9:38PM
6 0
profile picture
BigmoneyMatt
Posts: 1545 - Karma: 1,182
dwt802These replies are garbage.

Anyways, you’re probably catching an edge because your skis are new and have sharper edges which can be really grabby on rails, especially when wet. Most people do what’s called detuning your edges, where you file the edge down to smooth it out so it will slide rails better and catch less and will prolong the skis life overall. If you just do this underfoot you will still have decent edge control skiing and sliding rails/boxes will be way better.

**This post was edited on Apr 9th 2022 at 8:24:54pm


Don't listen to these pussies bro use an angle grinder I do it all the time.
Apr 10 2022 2:08AM
2 0
profile picture
nmwninjart
Posts: 2902 - Karma: 14,410
tri_photoon boxes I've seen my life flash before my eyes lol

Same here. My only ski injury was on a box , earlier this season. That made me start trying tubes because they suddenly looked less scary.
Apr 10 2022 9:40AM
2 0
profile picture
TRVP_ANGEL
Posts: 12420 - Karma: 114,467
Never put your own equipment on the line. Take an angle grinder to the resort and detune all the boxes and rail instead.
Apr 10 2022 9:53AM
6 0
profile picture
Cyanicenine
Posts: 966 - Karma: 2,296
You probably caught on a burr in the metal coping or your edges were too sharp and dug in. I usually try and do a rail check when something like that happens, and most the time I can usually find a flap of metal sticking up where someones edge dug in, or maybe your edge was the one that dug in. I then tell park crew about it and they grind it smooth. Otherwise I agree with everyone else that metal tubes are actually safer and more consistent than boxes once you learn them.
Apr 10 2022 11:15AM
5 0
All times are Eastern (-4)