• Forums
  • Gear Talk
  • Anybody know how far ill have to move my mount switching from attacks to pivots

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Anybody know how far ill have to move my mount switching from attacks to pivots

profile picture
KCoCM
Posts: 963 - Karma: 8,781
If this is a dumbass question forgive me, but Id rather ask here than take them to the shop and have them tell me they need to pull the attacks off to line up the jig and see how the holes matchup. Does anybody know from experience how far the mount position needs to be moved swapping from attacks to pivots? I know the 5mm rule but wondering how the screw holes match up. someone make my day and tell me the screw holes line up perfectly so i dont haev to move the mount position at all
Feb 4 2022 12:18AM
2 0
profile picture
ASSholebomber22
Posts: 6594 - Karma: 69,705
Print out some templates and put them over each other for an idea
Feb 4 2022 12:18AM
4 0
profile picture
KCoCM
Posts: 963 - Karma: 8,781
BiffbarfPrint out some templates and put them over each other for an idea


great idea thank you will do
Feb 4 2022 12:19AM
0 0
profile picture
Non_State_Actor
Posts: 4602 - Karma: 15,968
BiffbarfPrint out some templates and put them over each other for an idea


This...I think there may even be a template that shows several popular mounting patterns superimposed atop one another. I'll see if I can find it.
Feb 4 2022 1:29AM
2 0
profile picture
Non_State_Actor
Posts: 4602 - Karma: 15,968
mystery3This...I think there may even be a template that shows several popular mounting patterns superimposed atop one another. I'll see if I can find it.


https://drive.google.com/drive/mobile/folders/1lpDx4-8PF44Pc08HHNyYY6Gg2a3Dd245

All the way at the bottom

**This post was edited on Feb 4th 2022 at 1:35:18am
Feb 4 2022 1:34AM
6 0
profile picture
KCoCM
Posts: 963 - Karma: 8,781
mystery3https://drive.google.com/drive/mobile/folders/1lpDx4-8PF44Pc08HHNyYY6Gg2a3Dd245

All the way at the bottom

**This post was edited on Feb 4th 2022 at 1:35:18am

/thread

thanks bro
Feb 4 2022 1:46AM
1 0
profile picture
BradFiAusNzCoCa
Posts: 6635 - Karma: 57,162
That drive is the greatest Google drive to ever grace skiing
mystery3https://drive.google.com/drive/mobile/folders/1lpDx4-8PF44Pc08HHNyYY6Gg2a3Dd245

All the way at the bottom

**This post was edited on Feb 4th 2022 at 1:35:18am
Feb 4 2022 12:55PM
3 0
profile picture
Non_State_Actor
Posts: 4602 - Karma: 15,968
BradFiAusNzCoCaThat drive is the greatest Google drive to ever grace skiing


Straight fax right there.
Feb 4 2022 3:25PM
1 0
profile picture
isaacwrong
Posts: 2213 - Karma: 16,945
i went from fks mounted for 25/25.5 294mm bsl length and went down a full boot size (284bsl). current mount wouldn't work and remounting at center the holes were too close. ended up re-mounting with attacks and was perfectly fine....you should be good
Feb 4 2022 8:03PM
2 0
profile picture
KCoCM
Posts: 963 - Karma: 8,781
isaacwrongi went from fks mounted for 25/25.5 294mm bsl length and went down a full boot size (284bsl). current mount wouldn't work and remounting at center the holes were too close. ended up re-mounting with attacks and was perfectly fine....you should be good

looking at the pdf of the template overlap it looks like it’s possible with about 4mm of clearance between screw holes only moving my mount position a couple of mm but not sure if the shop will let their tech mount them that close
Feb 4 2022 8:18PM
0 0
profile picture
Non_State_Actor
Posts: 4602 - Karma: 15,968
KCoCMlooking at the pdf of the template overlap it looks like it’s possible with about 4mm of clearance between screw holes only moving my mount position a couple of mm but not sure if the shop will let their tech mount them that close


See if you can get closer to a cm. Moving the mount back (or forward provided they aren't center mounted already) a cm or two isn't going to have a huge impact.
Feb 4 2022 9:06PM
1 0
profile picture
tdollo
Posts: 3733 - Karma: 17,776
The toe holes will be the only thing that might make you move +/- 1cm. Pivot heel holes never really get in the way in my experience
Feb 5 2022 12:03AM
1 0
All times are Eastern (-4)