Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Mounting help

profile picture
yeyo9hunna
Posts: 25 - Karma: 153
Yo mounting my pivots tomorrow, just to check I have 302mm and 301mm boots, should I place the template with 300mm or 305mm?

and isn't this the right template? https://drive.google.com/file/d/1wWHDgiXL7BPZ4sR-YHzyy0mrHRWV1WRf/view

centerline etc I have already done perfectly
Jan 13 2022 10:23AM
1 0
profile picture
HypeBeast
Posts: 9774 - Karma: 72,202
This post seems sus. Weird English. Careful with that link
Jan 13 2022 10:30AM
4 4
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
ye bro I'm from Finland u sus and my Mac has some sort of autocorrect on lol, don't click the link heres photo

Jan 13 2022 10:38AM
4 0
profile picture
BradFiAusNzCoCa
Posts: 6637 - Karma: 57,173
Tervetuloa!

Yeah these are the better templates. Make sure your scaling is at 100% when printing. I don’t really think the mounting has changed for the bindings but double check that the holes match up by overlaying the bindings over the template. Check how far your heels are screwed down. Pivots only have 10mm adjustability so that’ll help you decide if you should mount 300 or 305 bsl
yeyo9hunnaye bro I'm from Finland u sus and my Mac has some sort of autocorrect on lol, don't click the link heres photo

Jan 13 2022 10:46AM
2 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
BradFiAusNzCoCaTervetuloa!

Yeah these are the better templates. Make sure your scaling is at 100% when printing. I don’t really think the mounting has changed for the bindings but double check that the holes match up by overlaying the bindings over the template. Check how far your heels are screwed down. Pivots only have 10mm adjustability so that’ll help you decide if you should mount 300 or 305 bsl


aight i did print the look pivot (2010) template
Jan 13 2022 10:51AM
1 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
yeyo9hunnaaight i did print the look pivot (2010) template


left out my text thats weird, I meant to say I did print the 2005 or lower template and placed it on my skis, thank god I noticed that it was the wrong one and now I have to print that 2010 or newer, the heel pattern is little different on the 2005 or older
Jan 13 2022 10:54AM
1 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
BradFiAusNzCoCaTervetuloa!

Yeah these are the better templates. Make sure your scaling is at 100% when printing. I don’t really think the mounting has changed for the bindings but double check that the holes match up by overlaying the bindings over the template. Check how far your heels are screwed down. Pivots only have 10mm adjustability so that’ll help you decide if you should mount 300 or 305 bsl


Ja kiitos nopeasta vastauksestasi :D
Jan 13 2022 11:45AM
1 0
profile picture
colorado_frenchy
Posts: 198 - Karma: 1,329
yeyo9hunnaYo mounting my pivots tomorrow, just to check I have 302mm and 301mm boots, should I place the template with 300mm or 305mm?

and isn't this the right template? https://drive.google.com/file/d/1wWHDgiXL7BPZ4sR-YHzyy0mrHRWV1WRf/view

centerline etc I have already done perfectly

300
Jan 13 2022 11:48AM
3 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
I dunno man, template is 300mm now should i stick with this 300mm or move it to 305mm
Jan 14 2022 10:11AM
0 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
This just seems odd? Measured from toe edge to heel edge



yeyo9hunnaI dunno man, template is 300mm now should i stick with this 300mm or move it to 305mm
Jan 14 2022 10:14AM
0 0
profile picture
BradFiAusNzCoCa
Posts: 6637 - Karma: 57,173
Take a photo of your pivot heel arms
yeyo9hunnaThis just seems odd? Measured from toe edge to heel edge
Jan 14 2022 11:26AM
0 0
profile picture
Non_State_Actor
Posts: 4604 - Karma: 15,968
Also measure your actual boots, sometimes the number printed on the heel can be off by a few mm.
Jan 14 2022 11:38AM
1 0
profile picture
BradFiAusNzCoCa
Posts: 6637 - Karma: 57,173
The boot heel sits further back in a pivot vs other bindings
BradFiAusNzCoCaTake a photo of your pivot heel arms
Jan 14 2022 1:11PM
0 0
profile picture
yeyo9hunna
Posts: 25 - Karma: 153
I placed the front binding on the tempate and boot on it and then the 300mm looked about right somehow, so i just sended with that and they are perfect. Thanks for the help, first time mounting but not last. Fun stuff doing it yourself. Hopefully i did not tighten the screws too much by hand and they are fine and stay on the skis :D



BradFiAusNzCoCaThe boot heel sits further back in a pivot vs other bindings
Jan 14 2022 4:07PM
1 0
profile picture
BradFiAusNzCoCa
Posts: 6637 - Karma: 57,173
Hell yeah! I think you’re fine with the screws - you can feel when they hit the bottom or they just keep spinning 😂

PS your place looks very Finnish 😃
yeyo9hunnaI placed the front binding on the tempate and boot on it and then the 300mm looked about right somehow, so i just sended with that and they are perfect. Thanks for the help, first time mounting but not last. Fun stuff doing it yourself. Hopefully i did not tighten the screws too much by hand and they are fine and stay on the skis :D
Jan 14 2022 4:29PM
2 0
profile picture
Phatboy64
Posts: 118 - Karma: 453
Nice looking setup! The skis….
Jan 14 2022 6:32PM
2 0
All times are Eastern (-4)