Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Another pivot question

profile picture
DesertStix
Posts: 2543 - Karma: 15,021
So I had a pair of pivot 12’s on my reckoners drilled for 315bsl and bossed up to gold 15’s. Since the screw patters are the same I just swapped them myself.

I was on a 315bsl boot last season but ended up getting new boots at 310 recently. I tried to click into the pivot 15’s I just swapped for and the heel doesn’t even lock in because of too much room. I thought it was only 5 on the bsl and should be good according to looks website but the boot straight up doesn’t even click in.

What should I do? The mount point is exactly where I want the ski like I really don’t want to go anymore backwards…
4 years ago
3 3
profile picture
BradFiAusNzCoCa
Posts: 7548 - Karma: 67,093
Where are the brake length indicators? They have 10mm of travel
4 years ago
2 0
profile picture
anders_a
Posts: 1680 - Karma: 5,605
you should be able to adjust
4 years ago
2 0
profile picture
Weiffen
Posts: 7 - Karma: 90
There are some little screws in the heel, try tightening those. It worked for me.
4 years ago
2 0
profile picture
rojo.grande
Posts: 1552 - Karma: 12,607
What other people said, but being more specific look at the arm bars on the sides of the heels. They’re usually black with a silver rod in them. They’re the parts that sit on the sides of the heel of ur boot. If you engage the heel piece without a boot in it, there’s Phillips heads on each. When you go to tighten these down, do them in stages. EX 5 cranks on the left then 5 on the right and so on. Do NOT tighten one side down then the other. You should be able to fit 310s in there just fine!
4 years ago
5 0
profile picture
DesertStix
Posts: 2543 - Karma: 15,021
I’m loving the downvotes lol thanks for the love. Trying to work on my own equipment more and not rely on shops since we really don’t have any and this help was appreciated!
4 years ago
6 1
profile picture
AaronO.
Posts: 1165 - Karma: 3,189
https://theskimonster.com/blog/posts/how-to-adjust-your-rossignol-ski-bindings/
4 years ago
2 0
profile picture
colorado_frenchy
Posts: 199 - Karma: 1,355
I was in the exact same boat last season, went from 315bsl to 310 bsl, assuming your pivot are perfectly mounted at 315 (with the heel piece in the middle of the adjustment range there) I was able to fit my 310 boots, with the heel piece all the way up (tighten the 2 screws at the back like people said)
4 years ago
3 0
profile picture
DesertStix
Posts: 2543 - Karma: 15,021
Yeah just to clarify for the thread: you helped me adjust them. I tightened the heel pieces and they are good. Thanks everyone.
4 years ago
3 1
profile picture
PimpChimpin
Posts: 1287 - Karma: 12,586
You need the pivot 18s🙄you ain’t nothing but a broke boy 🙄😭
4 years ago
3 0
profile picture
DesertStix
Posts: 2543 - Karma: 15,021
100%
PimpChimpinYou need the pivot 18s🙄you ain’t nothing but a broke boy 🙄😭
4 years ago
2 1
All times are Eastern (-4); Currently it's 1:45AM