Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Summer setup speed questions

profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
i finally got the pvc for my main rail and i'm wondering if you guys think i'll have enough speed to keep it as is or cut it down from 14' to 10'. the drop to 6' rail is just an extra thing i might add on that's not part of this rn. also i don't have the lumber for the feet/base that's why it's on cinder blocks as of rn. anyways you think i'll have to get lattice fencing or am i completely fucked or no worries? obviously need to get the rest of the turf aswell







also here's the pretty much finished bench you guys weren't big fans of:




**This thread was edited on Jul 8th 2021 at 5:43:46pm
Jul 8 2021 5:42PM
7 0
profile picture
MiIfHunter
Posts: 3978 - Karma: 4,258
Lube that shit up like ur prepping a girl for anal!
Jul 8 2021 5:59PM
15 1
profile picture
Vrooom
Posts: 4 - Karma: -33
The dirt is slowing you down put turf over the dirt to if you can
Jul 8 2021 6:27PM
0 8
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
Redrage12The dirt is slowing you down put turf over the dirt to if you can


this is a joke right
Jul 8 2021 7:34PM
11 0
profile picture
weastcoat
Posts: 6046 - Karma: 68,511
If I were you I would at least double or triple the height of your initial drop in. Your lip looks fine. Maybe throw some plywood at the base of it to make it a smooth transition.
Jul 8 2021 10:37PM
1 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
weastcoastIf I were you I would at least double or triple the height of your initial drop in. Your lip looks fine. Maybe throw some plywood at the base of it to make it a smooth transition.

drop in height isn't really changeable thing rn. i will do that after i test it with it all setup if it really doesn't work at all but that's a big thing to change and i don't have any extra of what i used for it last fall
Jul 8 2021 11:48PM
0 0
profile picture
isaacwrong
Posts: 2213 - Karma: 16,945
Chances are you are going to lose a bunch of speed from the drop in transition to lip…it’s way to long and unless you have Msnow it’s going to be too slow…move the drop in down or jack it up another 2-3feet. You gotta do some testing with a summer setup, you never know it might work
Jul 9 2021 5:57AM
5 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
isaacwrongChances are you are going to lose a bunch of speed from the drop in transition to lip…it’s way to long and unless you have Msnow it’s going to be too slow…move the drop in down or jack it up another 2-3feet. You gotta do some testing with a summer setup, you never know it might work


what about 8 feet of lattice fencing?
Jul 9 2021 12:06PM
1 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081





i moved the lip backwards as far as i could without it being on the slope and i'm gonna get plastic lattice fencing and make rows of it down 12' then it'll be just turf. i'm also probably just gonna cut the rail down to 10' but idk about that yet. think it'll work?
Jul 9 2021 2:29PM
0 0
profile picture
Proboscis
Posts: 60 - Karma: 809
Just put soap on the dirt
Jul 10 2021 12:33AM
2 2
profile picture
ScaryDumpTruck
Posts: 584 - Karma: 3,392
Lattice and then maybe build some side rails to push off of?
Jul 10 2021 4:53PM
5 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
ScaryDumpTruckLattice and then maybe build some side rails to push off of?


that's the best idea yet thank you
Jul 10 2021 8:29PM
0 0
profile picture
Canis_lupus
Posts: 573 - Karma: 6,048
Idk what anyone says that bench is sick
Jul 10 2021 10:44PM
1 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
Canis_lupusIdk what anyone says that bench is sick


thanks. most people didn't like it because it's a snowboard screwed to a couple stumps i think.
Jul 10 2021 10:51PM
1 0
profile picture
mrk127
Posts: 1736 - Karma: 15,686
I definatly wouldn't cut your rail shorter, you will probably regret having a short rail later once you dial the setup in. Obviously you need some more turf to fill in the gap but it seems like moving the drop in closer to the lip would be helpful for speed, If the drop in structure is even movable
Jul 11 2021 12:22PM
1 0
profile picture
little1337
Posts: 8159 - Karma: 45,773
ScaryDumpTruckLattice and then maybe build some side rails to push off of?


Pushing yourself in makes a huge difference, Thats the only way I can do certain tricks on mine
Jul 11 2021 6:31PM
0 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,081
mrk127I definatly wouldn't cut your rail shorter, you will probably regret having a short rail later once you dial the setup in. Obviously you need some more turf to fill in the gap but it seems like moving the drop in closer to the lip would be helpful for speed, If the drop in structure is even movable


it's dug into the ground 9≈ inches but i could do it. i will if i have to
Jul 11 2021 6:34PM
0 0
profile picture
DirtYStylE
Posts: 3635 - Karma: 8,774
You will want the long rail and you can always build a smaller one.


Getting the rail on the downslope instead of a flat section will give you more speed
Jul 12 2021 6:09PM
0 0
All times are Eastern (-4)