A quick word on blocking ads
It looks like you are using an ad blocker. That's okay. Who doesn't? But without advertising revenue, we can't keep making this site awesome. Click the link below for instructions on disabling adblock.
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
TBONE902Same for sure, as long as the holes aren't stripped you're good to go no remount!
DesertStixI got em originally drilled for fks120 and on the first day riding them, the toe wings cracked off so I unscrewed them and put other 12 toe pieces on with wood glue to seal the holes. This would be the third set in the same holes. Am I good?
KoshermilkUse epoxy if ur not gonna remount them again tbh
DesertStixI got em originally drilled for fks120 and on the first day riding them, the toe wings cracked off so I unscrewed them and put other 12 toe pieces on with wood glue to seal the holes. This would be the third set in the same holes. Am I good?
Paul.You might be okay. It’ll get a little sketchier each time you reuse holes but as long as you dont get a spinner you should be okay. If you do strip the holes you can always helicoil and continue to use the same mount point. Also just fyi you can swap out the toe wings in the 12/14s fairly easily by unscrewing the DIN screw all the way and putting new wings on (old toe anyway, not sure about the newer ones)
