Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Pvc Rail build ideas

profile picture
Wsmyers
Posts: 42 - Karma: 267
Hello ns, I know this is the millionth summer setup/ backyard setup thread but I was wondering what pvc rail I should build next. I have an A-Frame and a flat rail. I have a relatively flat yard so down rails would be hard.

**This thread was edited on Mar 29th 2020 at 1:40:07pm
5 years ago
5 0
profile picture
k_tivnan
Posts: 84 - Karma: 463
Waterfall rail. They’re pretty easy to build.
5 years ago
5 0
profile picture
TRVP_ANGEL
Posts: 12721 - Karma: 120,374
battleship rail
5 years ago
3 1
profile picture
CalumSKI
Posts: 4380 - Karma: 26,128
z rail
5 years ago
8 0
profile picture
iced
Posts: 3070 - Karma: 17,991
k_tivnanWaterfall rail. They’re pretty easy to build.


also great for sourcing pvc for construction sites i might add
5 years ago
1 0
profile picture
steeze_louise
Posts: 548 - Karma: 2,094
swoop
5 years ago
0 0
profile picture
CHU-TANG_CLAN
Posts: 2103 - Karma: 2,911
waterfalls are super fun for backyard set ups. zrails or elbow rails. im also a big fan of the traditional down rails
5 years ago
4 0
profile picture
theabortionator
Posts: 52718 - Karma: 175,336
Elbow and z. Or elbow and a flat rail so you can set up the z both ways.
5 years ago
1 0
profile picture
SuckleBrick
Posts: 452 - Karma: 1,095
Transfer rail?
5 years ago
1 0
profile picture
theabortionator
Posts: 52718 - Karma: 175,336
Flat up flat
A frame
Flat to kicker
Rainbow
Extra flats for werid combos
5 years ago
1 1
profile picture
Wsmyers
Posts: 42 - Karma: 267
theabortionatorFlat up flat
A frame
Flat to kicker
Rainbow
Extra flats for werid combos

How would you build a rainbow? Is there a plan or would I just have to wing it?
5 years ago
1 0
profile picture
theabortionator
Posts: 52718 - Karma: 175,336
WsmyersHow would you build a rainbow? Is there a plan or would I just have to wing it?


I would cut the edges out of ply 4-6 inches tall. Two identical rainbows on the edge. Then run 2x4s between not spaced too terribly far so it doesn't crack. Maybe every foot just to be safe and 2x4s are cheap. Could make it more rail or box depending on width.

Then just bend each piece of tubing and screw it in place.

Never build one but that's how id attempt rainbows kickers etx.
5 years ago
1 0
profile picture
Kangay_west
Posts: 36 - Karma: -14
Up flat shotgun
5 years ago
1 1
All times are Eastern (-4); Currently it's 7:06PM