Member of the Month

WoFlowz
August, 2022

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Multiple broken bindings

profile picture
JuncoFlocks
Posts: 56 - Karma: 85
So, I've broken another binding today... It's my 4th and it's always been the stopper that breaks.. this last pair to be fair was 5 years old, and they were marker squires 11 (i had them set to 7, which is at least 3 dins lower than what it should be). Beside being pissed as fuck it annoys me that I've never heard of anyone else breaking the stopper.. someone else ever had the same issue? Is it just bad luck or what?
Feb 2 2020 3:26PM 3 6
profile picture
TRVP_ANGEL
Posts: 11966 - Karma: 104,530
get a binding that has replaceable brakes
Feb 2 2020 3:28PM 7 0
profile picture
Bernat_Serra
Posts: 12 - Karma: 23
Broo in the marker squires I think you can replace the brake when you break it. Just have to buy the brake or go to some shop that can sell you some. And yes its very common to break it, its really tipical when you fuck up landing switch.

**This post was edited on Feb 2nd 2020 at 4:17:29pm
Feb 2 2020 4:14PM 12 0
profile picture
BackWoods420
Posts: 220 - Karma: 428
yea you can replace the breaks in squires for like 20$
Feb 2 2020 4:35PM 2 0
profile picture
skierman_jack
Posts: 1587 - Karma: 15,233
I broke 3 pairs of polymer bindings. Finally opted for metal Pivots and have not had problems since.
Feb 2 2020 4:40PM 5 0
profile picture
Paul.
Posts: 1406 - Karma: 8,811
Dont buy shitty bindings
Feb 2 2020 5:29PM 21 1
profile picture
T0AST.
Posts: 4939 - Karma: 53,819
SkylineGTR_R32I broke 3 pairs of polymer bindings. Finally opted for metal Pivots and have not had problems since.


Lmao do NOT buy pivots if you're worried about breaking brakes tho

Op that is what you mean by stoppers, right?
Feb 2 2020 7:30PM 6 0
profile picture
BambooSucks
Posts: 18 - Karma: 70
I've broken at least 5-6 brakes on various marker bindings, cheaper to replace than a whole binding
Feb 2 2020 7:43PM 0 0
profile picture
skierman_jack
Posts: 1587 - Karma: 15,233
BiffbarfLmao do NOT buy pivots if you're worried about breaking brakes tho

Op that is what you mean by stoppers, right?


Oh yeah don’t talk to me about brakes hahaha. There’s been a couple times where I’ve had to just bend them on back
Feb 2 2020 7:44PM 0 0
profile picture
270on420out
Posts: 7448 - Karma: 50,014
Imagine using Marker bindings 🤢
Feb 2 2020 7:58PM 15 2
profile picture
JuncoFlocks
Posts: 56 - Karma: 85
Actually the brake its fine, but it is screwed to a piece of the heel, and that's where it snapped, and the piece where you mount the heel piece snapped too, so that's why i can't replace it
Bernat_SerraBroo in the marker squires I think you can replace the brake when you break it. Just have to buy the brake or go to some shop that can sell you some. And yes its very common to break it, its really tipical when you fuck up landing switch.

**This post was edited on Feb 2nd 2020 at 4:17:29pm
Feb 3 2020 4:45AM 0 0
profile picture
CatdickBojangles
Posts: 5849 - Karma: 58,276
Don't buy kids bindings?
Feb 3 2020 8:37AM 8 0
profile picture
JuncoFlocks
Posts: 56 - Karma: 85
I've had them since I was 15 so
CatdickBojanglesDon't buy kids bindings?
Feb 3 2020 9:42AM 0 0
profile picture
skierman_jack
Posts: 1587 - Karma: 15,233
JuncoFlocksI've had them since I was 15 so


My 2 cents: anyone over 12 should get off squires. They are for KIDS. The griffin is not much more and you can find decent used one bc everyone and their mamas got them.
Feb 3 2020 10:18AM 6 0
profile picture
anders_a
Posts: 1648 - Karma: 5,444
try a jester 16? or 18 if you want the bragging rights.
Feb 5 2020 9:32AM 0 2
profile picture
TheClap.
Posts: 21638 - Karma: 3,972
Man, I hate it when I break my stoppers
Feb 5 2020 9:50AM 1 0
profile picture
shin-bang
Posts: 4090 - Karma: 6,770
This has literally been the most unproductive thread
Feb 5 2020 9:59AM 0 0
All times are Eastern (-4)