Ski popped off while learning to nosebutter. What do i need to change?

Gotta turn those dins up. Happened to me all the time until I cranked my dins to 14, also shorter/softer skis helps

SlushGotta turn those dins up. Happened to me all the time until I cranked my dins to 14, also shorter/softer skis helps

14?! I don't feel safe cranking it up to 14. Maybe 10. Would that work?
I'm using Blends so stiffness should not be an issue

https://theskimonster.com/blog/posts/how-to-adjust-your-marker-ski-bindings/

Usual suspects to pre-releasing bindings are forward pressure or toe height/AFD not set up properly. If still releasing, then make sure your DIN is properly adjusted for your size/ability. Test again and if they are still pre-releasing then try increasing DIN higher but in small steps.

Follow the link and check if the forward pressure and AFD/toe height is adjusted properly first.

Greg_Khttps://theskimonster.com/blog/posts/how-to-adjust-your-marker-ski-bindings/

Usual suspects to pre-releasing bindings are forward pressure or toe height/AFD not set up properly. If still releasing, then make sure your DIN is properly adjusted for your size/ability. Test again and if they are still pre-releasing then try increasing DIN higher but in small steps.

Follow the link and check if the forward pressure and AFD/toe height is adjusted properly first.

This. Don’t just turn up your dins. When you do turn the up I would adjust is in rather small increments too.

Squires are fucking trash tbh, they're not meant for aggressive skiing/park skiing they're more of a kids binding. I had those on my last skis and they kept popping off when landing and taking off jumps etc. I actually remember getting double ejected doing a nosepress with ended up with me faceplanting. I guess you could try cranking up the din but just think of your safety and the best bet would be getting new ones but that might not be worth it for you.