Stack height on attack 13s coming loose?

XxAc1DtR1PxXI noticed a few days ago I could feel both my toe pieces feeling wierd. There was a lot of movement round there. I took it into the shop and they set the correct height thus correcting the problem but today they started loosening again...

Anyone had this problem, or is it something that normally happens (this is my first pair so I don't know a lot about em)

I had this happen last winter, I threw some thread lock on that Jon and they haven't moved since.

CryptnoI had this happen last winter, I threw some thread lock on that Jon and they haven't moved since.

Kk Ty my bro.. On a side note do your bindings get squeaky as fuck?

XxAc1DtR1PxXKk Ty my bro.. On a side note do your bindings get squeaky as fuck?

Nah never.

XxAc1DtR1PxXKk Ty my bro.. On a side note do your bindings get squeaky as fuck?

If you decide to do this make sure you use blue loctite so that the afd will actually move if you ever have to move it again. Sounds like you have a bigger issue maybe boot wear related though.

Rum_HamIf you decide to do this make sure you use blue loctite so that the afd will actually move if you ever have to move it again. Sounds like you have a bigger issue maybe boot wear related though.

I would have the shop re adjust and ask to add locktite, preferably locktite 243 as that is a blue medium strength that works with grease or oil contamination. which the threads most likely have as they come from the factory with white lithium grease, although most of it has probably washed off if the bindings have been used for awhile.

If they are also a bike shop, then they probably already know about 243 specifically but if not you can drop some knowledge.

Thanks guys