Online
- erica
- iggyskier
- japanada
- Newschoolers
- Park_Ranger
- freestyler540
- LJ
- .Dad
- ALaw
- original
- Poindexter.
- RZcrew
- .bo.
- 20-100
- artrud23
- BenWhit
- BigPurpleSkiSuit
- bmpskier
- bread_bird
- bueno
- Cole9
- cpohl
- Detroit_Steeze
- drwclrk
- Dubey
- dubtwo
- Eachung
- eddos
- evaroni
- Fyrtruckee
- GarFrom09
- GettoBoyz
- Gryllz
- gunterf
- Jackc1017
- Jamartini
- JohnnyDope
- JoshesCounts
- Jtiedes
- jwilly
- kalle.
- KieranHeyman
- LARd.
- leevityllinen
- LineSkier
- LukasSchroeder
- lukemeahan.
- MaimHelp
- mals
- Manskimac
- MF-HARP
- mitchellm
- MN_slider
- Monsieur_Patate
- nationalforrest
- ngu8642
- nhrida
- nkwillie
- Park.
- ParryWithAnA
- pinkcamo1000
- PizzaKid
- powderwhor
- RakeBabes
- Redrobin
- Reed_ski
- s.j.mitchell
- satanworshipper
- ScreaminScott_69
- Sebohalloran
- skiingbackwardz
- ski_stee
- sullip1
- SuspiciousFish
- suup
- T0mmy
- The.Doctor
- VONNN
- w.monje97
- West.Is.Best
- WidthsRhymed
- willysworld
- X-REY
- yessirrrrrq
- 84 members online
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
ROSSIGNOL AXIAL TOE WITH PIVOT HEELS?!
Found some "rossignol Axial2 Free 200 XXL WB" toe pieces. (Basically the look and fks 18 toe?) and was wondering if I'll be able to run look pivot 14 heels with these toes. Thanks.
sounds like a great way to make sure you will never ski again
TRVP_ANGELsounds like a great way to make sure you will never ski again
Thanks for the input bud. But if people put 18 toes with 14 heels, this isn't to far off
Yeah I mean due to them not having height adjustable afd's, that may be your only issue. from the pictures I saw on evo, they look like they have slightly higher afd's? If the height is the same as the fks/pivot, then I don't see why it wouldn't work, just use common sense as far as dins go, and if you don't know how to properly set foreword pressure, have a shop do it
finderYeah I mean due to them not having height adjustable afd's, that may be your only issue. from the pictures I saw on evo, they look like they have slightly higher afd's? If the height is the same as the fks/pivot, then I don't see why it wouldn't work, just use common sense as far as dins go, and if you don't know how to properly set foreword pressure, have a shop do it
Got ya. I'll take them to my shop and do some testing
You can 100% use axial toes with pivot heels. Just make sure you use the correct height afd but the toe piece itself can easily be transferred to a different afd. I did this with a pair of World cup 14 din axial toes and pivot 14 heels and have never had a problem with releasing or toe movement.
WIZBANGThanks for the input bud. But if people put 18 toes with 14 heels, this isn't to far off
I’ve used different din pivot parts before to replace broken ones
ZypherYou can 100% use axial toes with pivot heels. Just make sure you use the correct height afd but the toe piece itself can easily be transferred to a different afd. I did this with a pair of World cup 14 din axial toes and pivot 14 heels and have never had a problem with releasing or toe movement.
Dope, thanks!
brett_fisherI’ve used different din pivot parts before to replace broken ones
This is fine with base plates but definitely sketch if using heel dildos or toe pieces
ZypherYou can 100% use axial toes with pivot heels. Just make sure you use the correct height afd but the toe piece itself can easily be transferred to a different afd. I did this with a pair of World cup 14 din axial toes and pivot 14 heels and have never had a problem with releasing or toe movement.
^^^^Bingo
All times are Eastern (-5)
