Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Deleted

profile picture
Durrrham
Posts: 146 - Karma: 730
deleted

**This thread was edited on Mar 23rd 2020 at 2:12:10pm
8 years ago
1 0
profile picture
cool_name
Posts: 4295 - Karma: 3,136
I railed ops mom once, that has hella sketchy, who knows what she has
8 years ago
17 3
profile picture
270on420out
Posts: 7525 - Karma: 51,354
A melted out DFD but the flat part was an S-rail
8 years ago
3 0
profile picture
.CJ.
Posts: 1509 - Karma: 3,672
Pretty much anything at skibowl if it's a hot day. But Tline had an up-down elbow kink to dfd and that was pretty sketch to hit.
8 years ago
4 0
profile picture
John18_6
Posts: 7313 - Karma: 49,171
This rail is just screwed into rotting 4x4s. It wobbles a good amount and it felt like it was going to tip over every hit I took on it.
8 years ago
4 0
profile picture
FIRAT
Posts: 534 - Karma: 1,349
Every rail I do is ultimate sketch
8 years ago
5 0
profile picture
tdollo
Posts: 3885 - Karma: 19,906
I got pressured into hitting a rail of some unknown white substance. Shit was hardcore sketch
8 years ago
9 0
profile picture
fredyferl
Posts: 2960 - Karma: 14,995
https://www.instagram.com/p/BYwgmM6gZzI/
The first rail. I probably should have not hit that, especially that I was hitting it unnatural. Also the last rail was a scary one, it was pretty steep and there wasn't that much snow
8 years ago
0 0
profile picture
search4freshies
Posts: 358 - Karma: 1,336
Blue Mountain Pennsylvania, early 2000's. There used to be this super sketch down rail that went from the pipe into the central park. It was about 40' of 2" pipe, and had a bastard seam in the middle that the fabricator never ground down. It wiggled side to side, was tall enough you could seriously nut yourself on it, and the landing was at an intersection so you could've easily been T-boned. It took me and my friends years before any of us made it close to the end. Kinda wish I could go back now and grease it.
8 years ago
2 0
profile picture
galardogod
Posts: 1716 - Karma: 5,336
A local mountain in Maine has a dance floor box on top of an Volkswagen Bus and they also have a Rollor coaster box that goes over a buggy
8 years ago
1 0
profile picture
theabortionator
Posts: 52723 - Karma: 175,364
The gore mcdonalds rail. It's a shotgun down rail. An operator bent both ends down with the tiller. Then tried to bend them back up from the ends and put a kink in the middle. Me and danetron were able to bend it back by standing the middle lake on an 8 foot flat bar and out body weight on the ends. Sketch. IT happened again and the middle kind was still there. Saw somebody front board to edge catch. Looked not fun. It's one of the features there I'll always skip.
8 years ago
0 0
profile picture
Big_Mtn
Posts: 551 - Karma: 1,647
.CJ.Pretty much anything at skibowl if it's a hot day. But Tline had an up-down elbow kink to dfd and that was pretty sketch to hit.


Can confirm, almost died so many times at skibowl.
8 years ago
0 0
profile picture
dwt802
Posts: 3389 - Karma: 33,405
My friends old rotten pvc dfd, the thing was wobbly and second hit as soon as I popped on the thing just collapsed and I almost took a few nails up my ass.
8 years ago
5 0
All times are Eastern (-4); Currently it's 10:08AM