• Forums
  • Gear Talk
  • Just remounting the back 1/2 of the binding to fit larger boots, right thing to do ????

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Just remounting the back 1/2 of the binding to fit larger boots, right thing to do ????

profile picture
DanAstro
Posts: 2 - Karma: 13
bought a couple sets of old skis and need to know if just remounting the back 1/2 of the binding and keeping to toe mount where it is so I can fit my larger boots is the way to go.........................??
Dec 1 2017 1:46PM
2 0
profile picture
profa_212
Posts: 8624 - Karma: 32,379
Doesn't sound like you have much of a choice....better than a full remount
Dec 1 2017 2:43PM
1 0
profile picture
DanAstro
Posts: 2 - Karma: 13
Cool, thanks for kick'n in Profahoben_212

**This post was edited on Dec 1st 2017 at 4:49:25pm
Dec 1 2017 4:48PM
1 0
profile picture
Cade2
Posts: 2124 - Karma: 2,704
Is that what a ski tech told you to do?
Dec 1 2017 6:28PM
0 5
profile picture
-SnowSnoli-
Posts: 756 - Karma: 1,703
Totally do able. Factors that come into play are the ski. And actual change in boot size.

Work out if it’s more logical to move just the front or just the back. Or if your boot center would be far to off you are better doing a full remount.
Dec 2 2017 6:27PM
1 0
profile picture
freeskibum82
Posts: 6355 - Karma: 5,055
-SnowSnoli-Totally do able. Factors that come into play are the ski. And actual change in boot size.

Work out if it’s more logical to move just the front or just the back. Or if your boot center would be far to off you are better doing a full remount.


What he said. i would just make sure you keep the boot sole mark close to the recommended. If it puts you too far back and its a twin that isnt already center mounted you could always move the toe instead.
Dec 5 2017 8:44AM
0 0
profile picture
nhjibber
Posts: 761 - Karma: 38
no it is not correct and to use a jig to redrill you will need to remove the toe piece anyway. depending how much bigger your boot is you could be moved off the mounting line rec by manufacture. this may or may not matter depending how far off it is/ personally skiing preference.
Dec 5 2017 10:31AM
0 3
profile picture
-SnowSnoli-
Posts: 756 - Karma: 1,703
nhjibberno it is not correct and to use a jig to redrill you will need to remove the toe piece anyway. depending how much bigger your boot is you could be moved off the mounting line rec by manufacture. this may or may not matter depending how far off it is/ personally skiing preference.



Nothing was said about not removing. But it doesn’t mean you have to redrill for the front or back. You can re use holes no problem.
Dec 5 2017 4:29PM
0 0
profile picture
kingsskier
Posts: 6212 - Karma: 2,101
As stated, it depends if you want you midsole to move back on the ski. You could move the toe forward if you want to move your midsole forward.
Dec 5 2017 4:51PM
0 0
All times are Eastern (-4)