I'm getting around to mounting my skis and at the same time thinking about sizing down a shell size on my boots from 26 to 25, bsl 306 to ~296. If I were to mount the Attack 13 so they're adjusted out completely would I have enough room to adjust down a shell size?
Poindexter.but why not wait till you get a new boot?
I'm planning to get the boots first but I might like to have the flexibility to use both boots if possible. I'm either in a 26 or a 25 so if I can mount either and have the option to adjust to a bigger shell or a smaller shell that would be great.
well like i said, if i remember right you should be fine either way. I adjusted my axials down to 26 fromm 28. and i think the attacks have as good or better travel. what ever shop you go to should be able to tell you for sure
Attack 13 bindings have 32mm of adjustment range. Usually they are mounted in the center of their range at shops using jigs and are set for whatever boots they are first mounted for. So you would have 16mm to go smaller and 16mm to go larger from the first “center in the range” mounted boot size.