Member of the Month

abjectwoe
May, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bubble on base of ski/Repair help

profile picture
C_dub
Posts: 373 - Karma: 2,316
Just bought a pair of 2014 Surface one life's. They came new in plastic. On of the skis, slightly forward of underfoot, there is a bubbled up section of base about two inches wide and 4 inches long. It does not touch the edge of the ski. The bubbled up area can be pressed down flat. Any ideas on how to fix it? Is it okay to ride as-is, or will it delam further? For repairs I was thinking of drilling a small hole into the raised up area then use a syringe to inject epoxy into the bubbled area, press it flat, then clamp it.
POLL
Edit Poll
Votes:

Take care when editing a poll; Options should be similar to maintain vote integrity.

More options will be added automatically as you type. You must supply a question and at least two options. No HTML is allowed.

8 years ago
1 0
profile picture
Bassin
Posts: 273 - Karma: 748
Damn that's a bummer, any photos? Might get some more ideas if we can see what it looks like.
8 years ago
0 0
profile picture
supersquid
Posts: 1430 - Karma: 2,552
you could take it to a ski shop and they could sand the base and then ptex it. But like stated above you should post some pictures to give us a better idea of what we are talking about.
8 years ago
0 0
profile picture
270on420out
Posts: 7524 - Karma: 51,325
Clamp it tight for a few hours and see if that does anything. If it's just base material, you should be fine but if it's a defect in the ski itself then you're fucked.
8 years ago
0 0
profile picture
hot.pocket
Posts: 4239 - Karma: 10,756
Most likely, you'll never even notice it's there. It will bubble up / become more pronounced while waxing (the hot iron makes the bubble expand), but otherwise it shouldn't affect the performance of the ski.

You can try and poke a hole, inject epoxy and clamp the ever living crap out of it overnight, and if you're set on repairing it this is the way to go. Otherwise you're probably okay with leaving it alone. Pics would be cool though.
8 years ago
6 0
profile picture
-SnowSnoli-
Posts: 756 - Karma: 1,703
Take a sharp Stanley blade. Cut a line to one side or middle or the bubble. Heat up some epoxy so it's nice a liquidy. Use blade or something to lift base and throw in a heap of epoxy. Take a metal plate or something solid and flat (hard wood is fine). Clamp and wait to set.

If done right no more bubble. And you won't even see the cut.
8 years ago
0 0
profile picture
Casey
Posts: 8020 - Karma: 26,937
That's awesome that they came straight from the factory like that. Great job on the QC
8 years ago
1 0
profile picture
brett_fisher
Posts: 2419 - Karma: 10,518
Are they mounted yet ?
8 years ago
0 0
profile picture
supersquid
Posts: 1430 - Karma: 2,552
CaseyThat's awesome that they came straight from the factory like that. Great job on the QC


they are 2014s and were most likely not straight from the factory. Its possible something happened to them during their 2+ year stay in a where house.
8 years ago
0 0
profile picture
C_dub
Posts: 373 - Karma: 2,316
brett_fisherAre they mounted yet ?


nah not yet, gunna do it as soon as I fix the bubble

supersquidthey are 2014s and were most likely not straight from the factory. Its possible something happened to them during their 2+ year stay in a where house.


yeah thats what I was thinking, are the durability on these any better than the surface park skis. I'd like these to last more than 5 days lol
8 years ago
0 0
All times are Eastern (-4); Currently it's 2:02AM