Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

2017 Goals

profile picture
Park_Ranger
Posts: 3825 - Karma: 8,634
Hire an accountant and drape myself in Yves Saint Laurent.

You?
Jan 1 2017 12:28AM
29 4
profile picture
Park.
Posts: 2480 - Karma: 4,582
try a trick every feature I hit so I can git gud
Jan 1 2017 1:19AM
1 0
profile picture
270on420out
Posts: 7496 - Karma: 50,874
Do a fucking double
Jan 1 2017 2:40AM
2 1
profile picture
PowPirate
Posts: 437 - Karma: 621
ski pow like a man possessed!!
Jan 1 2017 6:40AM
2 0
profile picture
Crispy.
Posts: 6103 - Karma: 7,628
Put together a decent season edit of myself without getting hurt!
Jan 1 2017 10:59PM
2 0
profile picture
cg.99
Posts: 317 - Karma: 718
grab 3
Jan 2 2017 9:51AM
2 0
profile picture
Willows
Posts: 442 - Karma: 2,624
throw consistent backies..
Jan 2 2017 2:20PM
0 0
profile picture
weastcoat
Posts: 6071 - Karma: 68,836
THEDIRTYBUBBLEDo a fucking double


So close back in march...
Jan 2 2017 7:18PM
0 0
profile picture
weastcoat
Posts: 6071 - Karma: 68,836
Build a backyard setup ASAP
Jan 2 2017 7:19PM
0 1
profile picture
SKRockies
Posts: 606 - Karma: 1,689
3's and 3's with grabs, both ways 270 out and maybe switchups
Jan 2 2017 7:23PM
1 0
profile picture
weastcoat
Posts: 6071 - Karma: 68,836
SKRockies3's and 3's with grabs, both ways 270 out and maybe switchups

Same here
Jan 2 2017 7:25PM
1 1
profile picture
AGOF
Posts: 2038 - Karma: 3,602
PowPirateski pow like a man possessed!!


Pretty much this, with the snow how it's been this year I've been skiing lines I've been looking at for 4-10 years it's been unreal, and most of the snow falls in spring where I live so it should just keep getting better
Jan 3 2017 2:20PM
1 0
profile picture
spat_man
Posts: 15 - Karma: 34
Me and my cousin are finishing our first heated ski press in a couple months... So hopefully we can build a pretty good pair that we can test out before summer!
Jan 4 2017 12:11AM
0 0
profile picture
Zennan
Posts: 222 - Karma: 165
spat_manMe and my cousin are finishing our first heated ski press in a couple months... So hopefully we can build a pretty good pair that we can test out before summer!


Ya we are!! and wow it costs more than I thought to build a pneumatic press :o
Jan 4 2017 12:13AM
0 0
profile picture
Frozinballz
Posts: 184 - Karma: 277
Stop skiing backseat like a jackass
Jan 4 2017 12:48AM
0 0
profile picture
GrandThings
Posts: 2953 - Karma: 29,040
grab tail
Jan 4 2017 1:13PM
0 0
profile picture
CheddarJack
Posts: 5203 - Karma: 7,380
GrandThingsgrab tail


This is "ski gabber" so these should be skiing goals
Jan 4 2017 3:12PM
2 0
profile picture
GrandThings
Posts: 2953 - Karma: 29,040
CheddarJackThis is "ski gabber" so these should be skiing goals


It is a skiing goal, and a life goal.
Jan 4 2017 4:16PM
0 0
profile picture
RousedWits
Posts: 387 - Karma: 893
I just want to get fricken pitted!
Jan 10 2017 9:23PM
1 0
profile picture
chris.goodhue
Posts: 946 - Karma: 6,204
Crispy.Put together a decent season edit of myself without getting hurt!


yeees.

And second that grabbing tail.
Jan 11 2017 12:19AM
0 0
profile picture
BigBobo
Posts: 121 - Karma: 80
i hope i can do a kfed on the kink this year, took me a while to learn how to swap on the kink in the first place.
Jan 15 2017 5:23PM
0 0
profile picture
Wutever
Posts: 279 - Karma: 262
Land one new flip with my new ACL!

I want the new one to be welcomed the way the old one went out, throwing bigger and better tricks. Any suggestions on what to go for?
Jan 15 2017 5:36PM
0 0
profile picture
AveragePete
Posts: 249 - Karma: 537
Not get any more fucking concussions once I'm good to get back on snow. Seriously I'm healing from my second one this season
Jan 15 2017 5:41PM
1 0
profile picture
Rennis_Deynolds
Posts: 2739 - Karma: 19,058
land new trick every time i go skiing
Jan 15 2017 6:06PM
0 0
profile picture
Scotty_B
Posts: 287 - Karma: 423
In terms of life, go full on try hard. Try-hard everything, try-hard never fail.

In terms of park I'd like to do a rodeo and slide unnatural like lacrosse.
Jan 15 2017 6:39PM
0 0
profile picture
swiggy
Posts: 104 - Karma: 310
Switch Quad flat 14 octo in the pipe
Jan 15 2017 11:12PM
1 0
profile picture
Mingg
Posts: 13938 - Karma: 48,488
take backies to real park jumps (have only done them on side hits and a jump made for backies)
maybe learn a 3 lol
get more consistent on rails
stop being a little bitch
learn how to land in bomb holes with style
Jan 15 2017 11:40PM
0 0
profile picture
CarinthiaCoach
Posts: 31 - Karma: 83
ZennanYa we are!! and wow it costs more than I thought to build a pneumatic press :o


what are you using as a bladder?
Jan 15 2017 11:56PM
0 0
profile picture
Cadenmccullough
Posts: 628 - Karma: 2,647
Switch rodeo's... Tried one today and somehow it tuned into a switch Misty 7, Not going to complain...
Jan 16 2017 12:07AM
0 0
profile picture
BigBobo
Posts: 121 - Karma: 80
CadenmcculloughSwitch rodeo's... Tried one today and somehow it tuned into a switch Misty 7, Not going to complain...


switch mistys look dope, especially with a solid grab
Jan 16 2017 1:34AM
0 0
profile picture
AGOF
Posts: 2038 - Karma: 3,602
Mingglearn how to land in bomb holes with style


Just go fast and air over them problem solved
Jan 16 2017 1:51AM
0 0
profile picture
Zennan
Posts: 222 - Karma: 165
CarinthiaCoachwhat are you using as a bladder?


We're using a firehose but probably going to have to be new as you literally cannot find anywhere a hose wide enough for what we want used. But what we're doing is buying the firehose and cutting it (with a circular saw) to a length a bit longer than our press then using some L angle bars and sealant to close it off. Afterwards were using a drill with one of those circle cup things that cuts circles (I forgot what it's called sorry haha) to cut a perfect circle in the bladder to place a valve that we will then again seal off with sealant so we can use our air compressor to pump up the bladder!

If you have any other questions 100% feel free to ask! We will be doing a full post when we're completely done and built a few pairs and tested them successfully as well! It takes a while when your in engineering at college as well haha. But ya don't have to wait for the post you can just ask whenever!
Jan 16 2017 4:04PM
0 0
profile picture
Mingg
Posts: 13938 - Karma: 48,488
A-cAllJust go fast and air over them problem solved


Fair. What about bomb holes on the lips/in run? Hahahah
Jan 16 2017 4:23PM
0 0
profile picture
milo-mcsenderson
Posts: 604 - Karma: 7,547
Dial Misty 5s and take them to 7s... also corking them would be sick.
Blind 2
Unnat slids and then some switch ups
Spins on if I grow a pair
Jan 16 2017 4:35PM
0 0
profile picture
TheDoughAbides
Posts: 1319 - Karma: 4,035
ski with my friends once before the season's over.
Jan 16 2017 4:43PM
0 0
profile picture
CarinthiaCoach
Posts: 31 - Karma: 83
ZennanWe're using a firehose but probably going to have to be new as you literally cannot find anywhere a hose wide enough for what we want used. But what we're doing is buying the firehose and cutting it (with a circular saw) to a length a bit longer than our press then using some L angle bars and sealant to close it off. Afterwards were using a drill with one of those circle cup things that cuts circles (I forgot what it's called sorry haha) to cut a perfect circle in the bladder to place a valve that we will then again seal off with sealant so we can use our air compressor to pump up the bladder!

If you have any other questions 100% feel free to ask! We will be doing a full post when we're completely done and built a few pairs and tested them successfully as well! It takes a while when your in engineering at college as well haha. But ya don't have to wait for the post you can just ask whenever!


Sickkkkkk, it seems like that's the go to method for pneumatic presses.

I should have known you would be an engineering student - I am too (mechanical specializing in renewable energy) what's your focus?

The tool that I think you're referencing is a hole saw? how big is the valve you have to install? I feel like with a fire hose you might be better off using a regular drill bit, or a wood spade, or maybe even a hinge cutter if you can find one in the right size.

Any plans on how you're going to make your wood cores?

I'm looking forward to the results, between school and my various projects I probably wont have time for something like this until the summer but let me know if you guys ever want a little outsider perspective
Jan 16 2017 6:20PM
1 0
profile picture
Zennan
Posts: 222 - Karma: 165
CarinthiaCoachSickkkkkk, it seems like that's the go to method for pneumatic presses.

I should have known you would be an engineering student - I am too (mechanical specializing in renewable energy) what's your focus?

The tool that I think you're referencing is a hole saw? how big is the valve you have to install? I feel like with a fire hose you might be better off using a regular drill bit, or a wood spade, or maybe even a hinge cutter if you can find one in the right size.

Any plans on how you're going to make your wood cores?

I'm looking forward to the results, between school and my various projects I probably wont have time for something like this until the summer but let me know if you guys ever want a little outsider perspective


Thanks man! Ya in my reading and "research" / just watching sick youtube videos of bosses making skis like Folsom Custom or ON3P that is what I tend to see every time unless they do a vacuum press which I personally don't believe works as well.

looooool nice choice! I like the renewable energy extremely interesting! -- I'm actually doing Industrial engineering, not the stereotypical engineering, but I do still get to take some more "engineery" classes along with the business side of things.

YES- hole saw... but ya know I may just do what you were saying with probably a drill bit and a drill press that I have access to... I was just thinking that a hole saw would be a bit more accurate for some reason? But ya thinking over it again just a drill bit will be good enough, especially with a drill press.

I actually am lucky enough to have access also to a CNC machine. The project last sumer was to learn a CAD software and just build a few crappy homemade pairs without a heated pneumatic press to see how I like it and the whole general process of building with the hope that someway I would have access to a CNC and amazingly I do! So I will be cutting out the sidecut and profiling the ski using that guy! There is a place next to my school called TechShop and my college gives me a free membership here and it has an insane array of machines and tools free to use including the CNC! But I do know that if I were looking to do something a bit more hands on without the big huge expensive machines, Iggy Skier has a post of how he router'ed the wood core.

I for sure will hit you up! Always good to get the perspective of anyone you can that you don't "technically" know.
Jan 16 2017 6:39PM
0 0
profile picture
skistupid
Posts: 303 - Karma: 1,186
This. Meh, whatever, there's like literally no snow anyway.

Jan 16 2017 8:36PM
0 0
profile picture
mike759
Posts: 872 - Karma: 1,949
consistent blind 2's and 360's
Jan 16 2017 10:59PM
1 0
profile picture
sui-kide
Posts: 330 - Karma: 680
I want to TRY atleast a flat/rodeo 5 this season. And also consistent rail tricks such as front swap, pretz 2 cus a couple of seasons ago I could do them easily but I gotta relearn that shit yo
Jan 20 2017 10:19AM
0 0
profile picture
SofaKingSick
Posts: 8946 - Karma: 57,648
SkierBetchLand one new flip with my new ACL!

I want the new one to be welcomed the way the old one went out, throwing bigger and better tricks. Any suggestions on what to go for?


IMO backies, flats, rodeos, or underflips..whichever one you havent done and seems most comfortable to you..people vary wildly on that opinion as you probably know
Jan 20 2017 12:39PM
0 0
profile picture
RousedWits
Posts: 387 - Karma: 893
SkierBetchLand one new flip with my new ACL!

I want the new one to be welcomed the way the old one went out, throwing bigger and better tricks. Any suggestions on what to go for?


BN Backflip off a 30 footer...
Jan 20 2017 1:08PM
0 0
profile picture
Wutever
Posts: 279 - Karma: 262
SofaKingSickIMO backies, flats, rodeos, or underflips..whichever one you havent done and seems most comfortable to you..people vary wildly on that opinion as you probably know


Mmm I think I wanna get into rodeos, they just have this clean flow about them that I appreciate. Plus it seems like a good off axis to start with after back flips since you can see see the ground almost throughout the entire spin.

I live like 30min from Woodward, I'll have plenty of time to learn it without ruining myself hopefully.
Jan 20 2017 2:50PM
0 0
profile picture
SofaKingSick
Posts: 8946 - Karma: 57,648
SkierBetchMmm I think I wanna get into rodeos, they just have this clean flow about them that I appreciate. Plus it seems like a good off axis to start with after back flips since you can see see the ground almost throughout the entire spin.

I live like 30min from Woodward, I'll have plenty of time to learn it without ruining myself hopefully.


nice, that's great! that way youll know risk-free what you can put to your feet. when i learned flips i was convinced rodeos would be easiest but it turned out my body likes backies and undies way more so air bags are super useful in my mind
Jan 20 2017 2:53PM
0 0
profile picture
Wutever
Posts: 279 - Karma: 262
SofaKingSicknice, that's great! that way youll know risk-free what you can put to your feet. when i learned flips i was convinced rodeos would be easiest but it turned out my body likes backies and undies way more so air bags are super useful in my mind


Thanks! I mean I ended up tearing my ACL doing backflips and that was after Woodward and landing them on roller skis on the BMX resi so nothing is guaranteed. I guess if everything was guaranteed without work, nobody would really have a good time.

I guess I'll just try all of them in the foam pit, see which ones stick first, work on those and come back for the rest!
Jan 20 2017 3:05PM
0 0
profile picture
The.Fish
Posts: 2269 - Karma: 4,985
270 out of most rails. 360 on non mini jumps.
Jan 20 2017 3:13PM
0 0
profile picture
SofaKingSick
Posts: 8946 - Karma: 57,648
SkierBetchThanks! I mean I ended up tearing my ACL doing backflips and that was after Woodward and landing them on roller skis on the BMX resi so nothing is guaranteed. I guess if everything was guaranteed without work, nobody would really have a good time.

I guess I'll just try all of them in the foam pit, see which ones stick first, work on those and come back for the rest!


great attitude-- and beyond a certain skill requirement, flips are all about your mentality. literally easier than 3s IMO, just seem scarier at first
Jan 20 2017 3:18PM
0 0
profile picture
Wutever
Posts: 279 - Karma: 262
SofaKingSickgreat attitude-- and beyond a certain skill requirement, flips are all about your mentality. literally easier than 3s IMO, just seem scarier at first


True! I'm really trying to get over any little fears left over, my crash last year wasn't massive but it still sucked. Oh well, it's something I want to do so I'll make it work.

So if you see someone flailing around at either the Boreal or Squaw park, that's me! Feel free to get a good giggle out of it, I'm sure I will too!
Jan 20 2017 5:51PM
0 0
All times are Eastern (-4)