Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Splitting Edges

profile picture
mswizzle3
Posts: 94 - Karma: 120
While skiing the other day I noticed that the edge of my ski cracked and is peeling away. Luckily its on the tail and hardly contacts the snow but I'm going on a 4 day trip in 2 days and this is the only ski I have at the moment. What should I do to stop or slow the edge from splitting even more?
9 years ago
1 0
profile picture
casey_cope
Posts: 675 - Karma: 3,398
Cut off the part that's hanging off
9 years ago
0 0
profile picture
JichelMusten
Posts: 750 - Karma: 2,889
Don't have much experience fixing skis but cutting the peeling part off and putting epoxy in its place seems like the least expensive and fastest option
9 years ago
0 0
profile picture
profa_212
Posts: 9257 - Karma: 40,960
Cut it off...epoxy...duct tape. You could rivet it if you have the time and ability, but the first option will suffice
9 years ago
0 0
profile picture
brett_fisher
Posts: 2419 - Karma: 10,519
Cut it off
Plug it with some epoxy
9 years ago
0 0
profile picture
DominatorJacques
Posts: 11247 - Karma: 76,550
mswizzle3While skiing the other day I noticed that the edge of my ski cracked and is peeling away. Luckily its on the tail and hardly contacts the snow but I'm going on a 4 day trip in 2 days and this is the only ski I have at the moment. What should I do to stop or slow the edge from splitting even more?


Any ski will fall apart eventually in terrain park riding rails and boxes.

That said this may have prevented premature failure. Tips and tails are at this point of the video.
https://youtu.be/N_aWiX_fekI?t=1h30m53s
9 years ago
0 0
profile picture
mswizzle3
Posts: 94 - Karma: 120
Thanks for the advice guys! Im gonna epoxy it up tomorrow and hopefully theyll last the trip!
9 years ago
0 0
profile picture
doitbig
Posts: 4818 - Karma: 315
I've been using surf board UV set expoxy with fiberglass in it to fill voids and split tips. Best results I've ever had.
9 years ago
0 0
All times are Eastern (-4); Currently it's 7:01PM