Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

PVC/ HDPE rainbow?

profile picture
Lbird
Posts: 401 - Karma: 2,188
Will this work? I know that pvc slides well, but I am really worried about my edges digging in on the up part... also it's HDPE so really slippery but also kinda soft
POLL
Edit Poll
Votes:

Take care when editing a poll; Options should be similar to maintain vote integrity.

More options will be added automatically as you type. You must supply a question and at least two options. No HTML is allowed.

Dec 4 2015 4:45PM
27 3
profile picture
*JP
Posts: 301 - Karma: 440
its possible, ive seen it before, along with c rails and u rails. check build a jib, im sure theres more info there.
Dec 4 2015 4:51PM
3 0
profile picture
freewillie
Posts: 429 - Karma: 3,321
hb try not being a pussy
Dec 4 2015 5:28PM
6 0
profile picture
Breaking_Rad
Posts: 478 - Karma: 1,088
I thought the same thing would happen on a cannon rail, but I've had that setup quite a bunch and it slid up just fine. It was set pretty steep a few times too. Not sure if the shape of the rainbow would help or hurt.
Dec 4 2015 11:16PM
0 0
profile picture
fries
Posts: 2978 - Karma: 7,515
Ive made a small pvc rainbow and it worked fine
Dec 5 2015 12:37AM
1 0
profile picture
theabortionator
Posts: 51263 - Karma: 157,459
LbirdWill this work? I know that pvc slides well, but I am really worried about my edges digging in on the up part... also it's HDPE so really slippery but also kinda soft


Idk, I think you're better off just going with pvc and saving your loot.

If you;re going to spend money on hdpe you should have roper coping which will be tough with it being a bent rail. Kinks are eays bends not so much.
Dec 5 2015 2:30AM
1 0
profile picture
UilyJeff
Posts: 394 - Karma: 1,480
I did one last year with steel coping and Formica. Worked well
Dec 5 2015 3:20PM
1 0
profile picture
Lbird
Posts: 401 - Karma: 2,188
AlsoKnownAsIdk, I think you're better off just going with pvc and saving your loot.

If you;re going to spend money on hdpe you should have roper coping which will be tough with it being a bent rail. Kinks are eays bends not so much.


I already have the hdpe, and it's a tube not a sheet. I got it for $4 at habitat for humanity. Would I still need coping?
Dec 5 2015 6:00PM
0 0
profile picture
Shoey-Ski
Posts: 1649 - Karma: 6,190
LbirdI already have the hdpe, and it's a tube not a sheet. I got it for $4 at habitat for humanity. Would I still need coping?


That's a sick deal wish I could find some cheap stuff like this
Dec 5 2015 7:35PM
0 0
profile picture
dirthole_themole
Posts: 18 - Karma: -169
freewilliehb try not being a pussy


I fucked your mom and sister in the pussy...
Dec 5 2015 8:04PM
1 2
profile picture
freewillie
Posts: 429 - Karma: 3,321
dirthole_themoleI fucked your mom and sister in the pussy...


You need to fucking cool it.
Dec 5 2015 8:53PM
3 0
profile picture
JohnBolea
Posts: 512 - Karma: 1,979
what is hdpe
Dec 5 2015 8:56PM
1 1
profile picture
freewillie
Posts: 429 - Karma: 3,321
johnboleawhat is hdpe


what is google?
Dec 5 2015 9:00PM
2 0
profile picture
theabortionator
Posts: 51263 - Karma: 157,459
LbirdI already have the hdpe, and it's a tube not a sheet. I got it for $4 at habitat for humanity. Would I still need coping?


nah youre fine. the problem with it on boxes is you have that 90d edge. when you slide part of your skis hangsnoff especially if you come on at an angle or grip tbe rail.even then its not that bad for backyard stuff but whatever.

if it's round youre good
Dec 5 2015 9:02PM
0 0
profile picture
Lbird
Posts: 401 - Karma: 2,188
Shoey-SkiThat's a sick deal wish I could find some cheap stuff like this


If there's a habitat for humanity restore near you I would definitely check that out, I got like 40 feet of pvc for 5 bucks the same day, it's like the goodwill of building supplies
Dec 5 2015 9:23PM
0 0
All times are Eastern (-4)