Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
BrothsTopazHahahahhahahahaa. No bad! Thanks yo
gnar_whalThat's what I use. Just the handlebar mount at the end of a ski pole. I put duct tape under it for grip
Grand total: .53 Cents
Used the GoPro 3M Sticky pad to connect to the copper.
p.hawksI would drill though it and at least use a zip tie or something. I feel like that one could come loose quite easily
BrothsTopazThats what im gonna do. For my own sake of it coming loose and losing my go pro, Im gonna wrap a zip tie around it.
p.hawksI was thinking you could drill through the plastic/3m gopro mount using the copper as a guide, then put the zip tie through that hole. That way, even if the connection between the 3m and the copper fails, you would still have a usable stick (assuming the zip tie is tight).
BrothsTopazGenius. Haha not a bad idea and ill definitely look into doing that. Im not too worried about the 3M sticky to lose its stickiness because that stuff is super tough, but for added protection, the zip ties would be awesome. Still, not bad considering i spent $0.53
p.hawksThe 3m works well, it's what we all use on helmets in the cold etc. It's the fact that the copper will shrink in the cold that would likely cause it to fail.