Ski Binding Brake width

What bindings are they?

i ran 130mm brakes in my rocker 122's but some people ran 115mm salomon brakes fine on the 122. Best bet is to just try them and see which works best.

TheDankestHamJust Bought a pair of Candide 4.0s and they are 122 underfoot. Should I get 130mm or 120mm brakes? I feel like 120 would fit fine but could be too small and I feel like the 130mm might be too big, andy thoughts?

If they are the same binding go for the 130mm. If you found a sick deal on the 120mm then get those, otherwise get the 130mm just to be safe. Id never go for this even if the price is a little cheaper just because I like peace of mind and sometimes companies that have a 122 ski can sometimes really be a 123 and bindings that are 120 can be more like a 119 or 118. IM not sure if thats completely true but I never put myself in that situation regardless. You'll honestly be fine most likely with a 120mm binding, but 130mm would be a little better. Also, what bindings are the 120mm and 130mm?

Sounds like a marker.

I'd go with the 120 if that is the case. They might catch a little when you first mount them but once the brakes wear in you'll be all set.

Don't mean to thread jack or anything but I dont wanna flood GT etiher.

I'm getting Jessie 100s and was looking to get Pivots but they only come in 95mm and 115mm brakes. Would either one work or should I look for a new binding? If it matters, I'll be using them mostly for all mountain stuff, a little bit of park but mostly for east coast pow days/groomers/trees and when I travel out west.

MinggDon't mean to thread jack or anything but I dont wanna flood GT etiher.

I'm getting Jessie 100s and was looking to get Pivots but they only come in 95mm and 115mm brakes. Would either one work or should I look for a new binding? If it matters, I'll be using them mostly for all mountain stuff, a little bit of park but mostly for east coast pow days/groomers/trees and when I travel out west.

Go for the Pivot with the 95 Brake. They will be tight but not to tight. the 115 would hang over a lot and be liable to catch going switch. 105 is usually when I start putting a 115 on there.

freeski1620Go for the Pivot with the 95 Brake. They will be tight but not to tight. the 115 would hang over a lot and be liable to catch going switch. 105 is usually when I start putting a 115 on there.

Oh cool! Thanks! So I wouldn't need to bend it at all then?

MinggOh cool! Thanks! So I wouldn't need to bend it at all then?

I would not think so. I put them on Blends all the time and never have to do anything. theres enough play in the brakes

Okay so I’m getting Marker Gs that run in a 90 or a 110 brake width and the waist on my ski is 99 so I’m wondering if I should go 110 to play it safe and avoid mechanical failure on the brake or should I go 90 and bend them to the correct width

DuncanSOkay so I’m getting Marker Gs that run in a 90 or a 110 brake width and the waist on my ski is 99 so I’m wondering if I should go 110 to play it safe and avoid mechanical failure on the brake or should I go 90 and bend them to the correct width

Griffons? Why? Are you getting a sweet deal?