


Sorry for crappy pictures but this is a temporary fix so if you know how to fix it that would be awesome
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
PoikenzFrom the first picture it looks like some or your base is missing? But in the second it doesn't look that way at all. Fuck I am confused.
Regardless, (as I would tackle both the same) go get yourself some epoxy, I recommend west system's G-flex epoxy (the plastic one) just because it is what I have been using and it holds up great. If not, most plastic/ marine 2 part epoxies that you can find at any hardware store will be fine, JB weld seems to be a staple for most here.
First thing is first, try to clean out the delam, I use a wet paper towel and follow up with a dry one to get all the water out. Don't worry about your core getting soaked as most cores don't extend fully to the tip.
Mix up your epoxy and apply it to both sides as best you can, if you have a putty knife or anything similar I would use that to push it deeper into the delam, try your best to to make your ski delam more at this point.
Get a couple of c-clamps and clamp your tip down as tight as you possibly can, a lot of your epoxy will squirt out, I'd wipe it up asap so you don't have to sand it off later. Put something between the clamps and the ski like a straight piece of metal or a thin piece of wood on each side to distribute the pressure of the clamps over the entire delam. Let it set and you're good to go.
PoikenzMix up your epoxy and apply it to both sides as best you can, if you have a putty knife or anything similar I would use that to push it deeper into the delam, try your best to to make your ski delam more at this point.
SteezOnSkis12And all I have is quick fix rubberized epoxy
rozboonSo wait, do you want "how to fix this kinda properly" or "how to fix this using nothing except what SteezOnSkis12 has at his house, which we have to guess at" - if it's the latter, try melting some of your mom's dildos on the stove and filling the gap with that.
rozboonSo wait, do you want "how to fix this kinda properly" or "how to fix this using nothing except what SteezOnSkis12 has at his house, which we have to guess at" - if it's the latter, try melting some of your mom's dildos on the stove and filling the gap with that.