Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Front 6 help

profile picture
Park.
Posts: 2480 - Karma: 4,582
trick tip forum is dead, so I thought I would ask help here. I was just wondering any tips to set a better edge or get more power out of the spin because I can barely get front 4's around. I never seem to get a solid set for a frontside spin and just kind of float things around. Any tips besides throw it harder?
Mar 23 2014 10:21PM
36 1
profile picture
SkierPT
Posts: 2176 - Karma: 4,720
If you can 6 out you're probably better than 90% of this site. I can't but I'd say going fast into an up/cannon rail and floating it deep
Mar 23 2014 10:25PM
1 0
profile picture
ThundaKilla
Posts: 2859 - Karma: 3,733
That's probably part of the problem...
Mar 23 2014 10:27PM
16 0
profile picture
Park.
Posts: 2480 - Karma: 4,582
I realize that and I am asking for help because I can never get a solid lock for frontside tricks. Any tips would help me get my front 4's on lock too.
Mar 23 2014 10:30PM
1 0
profile picture
luke.smart
Posts: 614 - Karma: 1,730
Not sure how you do your front 4's but what helps is being patient as you take off opposed to focusing too much on the spin making you get caught up and twisted.
Mar 23 2014 10:35PM
2 0
profile picture
ThundaKilla
Posts: 2859 - Karma: 3,733
You should have asked for front 4 help aha. Try to scissor more aggressively to set the rotation and open your shoulders more when you pop.
Mar 23 2014 10:36PM
0 0
profile picture
DaveJ
Posts: 315 - Karma: 1,096
Get consistently good at setting your edge on fs2 and fs4 once you can get both those tricks on most features move to sixes. When I learned them it was on a box just set your edge at the end and throw it really hard then spin as hard as you can and at four look over your shoulder just like how you would spin a 5 when your at 3.
Mar 23 2014 10:36PM
5 0
profile picture
Logan.
Posts: 717 - Karma: 1,862
I'll start by saying I can't do the trick. But anyways to get more rotation on a frontside spin you wanna get a really good edge lock obviously, but the part that I find really helps is if you lock your edge but don't stop your rotation yet, by that i mean lock your feet in position but keep rotating your upper body so that your shoulders are almost facing uphill, from there you can just kick off and unleash a faster spin, while spinning, commit and make sure you keep turning your head. What you're doing when you do this is basically setting a rotation in a natural way rather then, like how most people do it, just trying to spin from your foot.

Spark notes: Lock your foot, keep rotating upper body (counter to your frontside spin direction), then release it all at once.
Mar 23 2014 10:40PM
2 0
profile picture
Park.
Posts: 2480 - Karma: 4,582
thanks a ton I will definitely try this. and to whoever said something about not knowing what my front 4's look like, I filmed earlier today and even though I didn't get one, I noticed how effortless the spin was. I scissored about as hard as a weak front 2, but I barely cocked my shoulders. I would get a little over a 3 around and then hit the ground and shuffle a bit. I am guessing that this would be fine if I tried it off a bigger drop (even though it was big enough for my friend to front 8 out of), but I need to get it off something a lot less substantial. Anyway, I might be able to get a clip of it so I can get more specific advice.
Mar 23 2014 10:55PM
0 0
profile picture
270on420out
Posts: 7494 - Karma: 50,826
My friend skis off of a knuckle and hucks as many spins as he can.
Mar 24 2014 8:55AM
0 1
profile picture
kung_powpow
Posts: 1990 - Karma: 3,669
I can't front 6 yet but I've done blind 6s and front 4s. Whenever you need to spin more just pop harder, set the rotation more aggressively, and send it to Gucci plateau
Mar 24 2014 9:01AM
1 0
profile picture
broto
Posts: 9039 - Karma: 25,658
think of it as a 540 on a jump, but off of a rail. really.
Mar 24 2014 9:22AM
0 0
profile picture
John18_6
Posts: 7313 - Karma: 49,158
Practice getting front 4s out of rails about a foot off the ground by junta hucking as hard as possible (think of front 3 swap). Then just huck it out of a normal rail. Like huck HARD. It's rare to see a floaty front 6.
Mar 24 2014 12:53PM
1 0
profile picture
Horsefacekillah
Posts: 867 - Karma: 874
work on scissoring , once your comfortable scissoring and can get you 2's, 4's clean then go for 6. Maybe practice front swaps to help with the scissor. and also cannon rail or a rail that you have some time to spin off
Mar 24 2014 1:21PM
0 0
profile picture
bgeskior
Posts: 463 - Karma: 1,552
learn super feds first. theyre easier but still have the same feel as a front 6
Mar 24 2014 2:12PM
0 0
profile picture
Rumi.
Posts: 1231 - Karma: 556
drop a hard pretzel on your leading foot and jump hard off that foot (if that makes sense). If your just spinning off the end it's never gonna work. You really need to dig in that edge and pop hard then pencil up and spot the landing. "digging in" that front edge helps a ton.

Also with any trick watch people do it and learn from that, it helps when you can visualize the trick.
Mar 24 2014 5:23PM
0 0
profile picture
.squirrely.
Posts: 7563 - Karma: 7,540
do it off a flat bar with a drop, frontside spins off up rails are much harder. i set it like a front 4 then when i get to 450 i dip my nose and kind of pull around the last 180 with just my lower body.
Mar 24 2014 6:50PM
0 0
profile picture
Park.
Posts: 2480 - Karma: 4,582





(First attempt at embedding)
Mar 26 2014 10:55PM
0 0
profile picture
Park.
Posts: 2480 - Karma: 4,582
ok sweet it worked now is there any specific instructions that people could tell me?
Mar 26 2014 10:58PM
0 0
profile picture
Park.
Posts: 2480 - Karma: 4,582
Logan.EI'll start by saying I can't do the trick. But anyways to get more rotation on a frontside spin you wanna get a really good edge lock obviously, but the part that I find really helps is if you lock your edge but don't stop your rotation yet, by that i mean lock your feet in position but keep rotating your upper body so that your shoulders are almost facing uphill, from there you can just kick off and unleash a faster spin, while spinning, commit and make sure you keep turning your head. What you're doing when you do this is basically setting a rotation in a natural way rather then, like how most people do it, just trying to spin from your foot.
Spark notes: Lock your foot, keep rotating upper body (counter to your frontside spin direction), then release it all at once.


The referenced post has been removed.


Came in switch and turned my upper body a decent amount beforehand. floaty front 4 out dialed, and front 6 out was definitely not hucked, so Im pumped I got a decently floaty 6 out! thanks for the help guys I got it 3rd try thanks to you guys
Nov 22 2014 4:24PM
0 0
profile picture
d.mcknight
Posts: 778 - Karma: 1,539
Literally just do the exact same thing you would do to 4 off a shorter rail off a taller rail and if you commit chances are it will work
Nov 22 2014 4:28PM
0 0
All times are Eastern (-4)