Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Will my bindings fit any boot of same size?
so i have been skiing atomic boots size 27.5 all season. i just got a pair of full tilt booters size 27.5 As i wait for them to arrive im asking if i should be able to just snap right in or would i need to remount bindings all together or at least adjust them?
Unless the boot sole length is the same you should get them adjusted at a shop. Even if they are the same you should get th em adjusted just in case.
If the shell length is the same then they should fit in strait away. That being said it is always a good idea to have the fit checked out as mentioned above, as different boots toes and heels are shaped differently sometimes even with the same shell length there is a little wiggle when you switch to a different boot. I have a buddy who has the same shell size on his boot as myself and we can swap skis though, so it should really work with no recalibration.
"If you don't make it the first time, just go three times faster"
"There's a thin line between adventure and suicide, the thinner the line the better the adventure"
"If it doesn't hurt then you aren't going big enough"
what bindings do you have? most likely all you will need to do is adjust the heel track.
No fool sharks aint fish, Sharks be like from tha manta ray family. Dey aint got bones like fish. Lil_G
Your coming down about half a shell size so yeah you will need them adjusting. The BSL of an atomic will be around 316 whereas your new boot is 310. That is over half a size difference so they will for sure need the forward pressure setting. If you can adjust the AFD and wings that will need doing too.
All times are Eastern (-5)