Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edge Ripping Out

profile picture
YouAllSuck
Posts: 632 - Karma: 1,177
I noticed a couple weeks ago that at one of my edge cracks the edge was starting to pull out a little. I filled the around it with epoxy, and filed the edge down to even it out.
Yesterday I noticed it started to really come out. I used the handle of my pole to pound it back in, but that only kept it in for a run or two.
Are there any suggestions on how to fix it?
I was thinking that I would put a bunch of epoxy in the ski and clamp the edge down.
Click for larger image
Click for larger image
Mar 16 2014 5:34PM
3 0
profile picture
blowleaf420
Posts: 5 - Karma: 21
bump i need help too
Mar 16 2014 8:29PM
0 0
profile picture
Ali_Dibden
Posts: 1966 - Karma: 1,688
On filthies too, fuck!

I would epoxy and clamp and that should hold for a while, really hoping the edge cracks on mine amount to nothing!
Mar 17 2014 6:18AM
0 0
profile picture
NH_OPERATOR
Posts: 1070 - Karma: 2,883
If you can manage to get epoxy underneath it that is your best option, just make sure you use one rated for cold temps so you dont get swelling. The shitty part is that most epoxy would not be easy to get into a gap that small, as youll really want to get it as deep into the ski as you can before clamping it. The other thing youll want to do once you get it back in there is to really file the shit out of the gap so there is nothing that could possibly catch on anything. You want to reduce the risk of hanging that piece up on a rail or rock and ripping it from the ski. Whenever I see an edge crack appear I pretty much just round the edge off where the crack is.
Mar 17 2014 6:20AM
0 0
All times are Eastern (-4)