Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Din

profile picture
airic
Posts: 720 - Karma: 16
My skis are sitting on the floor and i'm trying to decide what I should set them at. I have them at 7 right now. Im about 120lbs and I shred the 'gnar. If you could post what your din is set at and how much you weigh it would give me a good refrence to get an idea of what I should put em at.
thanks.
___________________

Do what you want to do, be who you want to be.

-Airic
Dec 11 2004 7:41PM
0 0
profile picture
real9999
Posts: 652 - Karma: 10
Even if you have really small feet, 7 is on the high side for 120 lbs....
Dec 11 2004 8:23PM
0 0
profile picture
Pklink04
Posts: 5608 - Karma: 392
yeah i am 110 and im at 4, but i put my ski 'level' 2 you may be 3 so that might come it to effect. also i should really be at a 3.5 but i truned it up



If The women don't find you handsome... atleast they will find you handy

(Red Green)
Dec 11 2004 8:27PM
0 0
profile picture
Bulky
Posts: 1054 - Karma: 11
i'm 130 and my din is 8, you will be fine

Dec 11 2004 8:39PM
0 0
profile picture
airic
Posts: 720 - Karma: 16
Okay thanks.. they put them at 6 at the shop by the way.
oh and I noticed the tech put the heel pieces at 5 and a half, is there some reason to have the heel piece lower? Or should they usually be the same?
thanks again..
___________________

Do what you want to do, be who you want to be.

-Airic
Dec 11 2004 8:45PM
0 0
profile picture
zerospinskier
Posts: 4867 - Karma: 350
he was probably just off a little, you want them the same
Dec 11 2004 10:22PM
0 0
profile picture
unionbowler
Posts: 67 - Karma: 10
actually, if you check your receipt from the shop tech, it will probably say that he had to set the heels a little lower becase the springs were testing high when set at 6.

i suppose asking the shop tech about it would be too much bother...
Dec 13 2004 5:00AM
0 0
profile picture
JackieChan
Posts: 417 - Karma: 10
Crank those bitches up.
Dec 13 2004 11:07AM
0 0
profile picture
skir216
Posts: 741 - Karma: 10
if you wana tear something then go ahead keep em at 7

aslong as u have decent bindings (i sware by look/rossi) there should be no reason to din up that much, im 160 and boot size 314mm, by the book, type three, i should din at 7/7.5 and thats what i keep it, i dont have issues comin out
*JaSoN*
Dec 13 2004 11:48AM
0 0
All times are Eastern (-4)