Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

ON3P Jeronimo with FKS, brake-width question

profile picture
seanahue.
Posts: 2142 - Karma: 3,368
Jmos are 98mm underfoot.

FKS come in 90mm and 115mm widths :\

Concerned that bending the brakes on the 90s will weaken the metal, or if i don't bend them, if they will deck and be ineffective.

Equally concerned that there will be drag issues if I go with the 115s.

Halp!
Dec 1 2013 6:38PM
9 2
profile picture
division.bell
Posts: 2762 - Karma: 1,905
Get the 90mm brakes. You'll be fine.
Dec 1 2013 7:06PM
1 0
profile picture
seanahue.
Posts: 2142 - Karma: 3,368
Did you bend yours or no?

It's only 4mm short on either side so I'm hoping I won't have to bend, but still have the brakes work properly in case of an eject.

They're actually going on my GF's skis, so I really don't want to fuck it up... I like blowjobs, and would like to continue receiving them on a regular basis ;)
Dec 1 2013 7:34PM
2 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,883
I have stock FKS 155s (75mm brakes) on my Jmos with bent brakes (they work fine and don't seem to have durability issues that I can see), I have stock FKS 180s (90mm brakes) on my FRs (unbent, obviously), here's what they look overlapped, you might have to do some minor tweaking, but they should fit just fine.

Click for larger image
Dec 1 2013 8:10PM
1 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Tweak em a little bit for your gf, insert joke here about you both not minding if it's a little tight.
Dec 1 2013 8:26PM
3 0
profile picture
tsk94
Posts: 184 - Karma: 122
The standard brake is 95mm not 90.
Dec 1 2013 8:38PM
2 0
profile picture
tsk94
Posts: 184 - Karma: 122
Therefore they will fit easily.
Dec 1 2013 9:12PM
0 0
profile picture
division.bell
Posts: 2762 - Karma: 1,905
They absolutely do not need to be bent in order to fit the Jmo's. I had the standard 90mm brakes on my Jmo's and they fit fine without bending, or any unwanted contact with ski or sidewall.

The 90mm brakes measure out to be wider than 90mm anyways.

You can make small tweaks to the brake arm just by giving it a tug if you're that concerned. Seriously, it's just a few millimeters though and you'll be fine.
Dec 1 2013 9:42PM
0 0
profile picture
TheDetectives
Posts: 634 - Karma: 1,472
no, it's 90 or 115
Dec 1 2013 9:59PM
0 1
profile picture
phyz
Posts: 573 - Karma: 937
steel can also be bent relatively a lot without becoming brittle and weak, so I especially wouldn't worry about the strength of the brakes being compromised
Dec 1 2013 10:17PM
0 0
profile picture
seanahue.
Posts: 2142 - Karma: 3,368
awesome, feel a lot better about going with the 90s

thanks for all the helpful responses, +k all around!
Dec 1 2013 10:57PM
0 0
profile picture
SoAnG
Posts: 386 - Karma: 389
It will be fine. Using my 90mm FKS 140 on the Jeffery's without issues.
Dec 2 2013 12:48AM
0 0
profile picture
tsk94
Posts: 184 - Karma: 122
No it's not.
Dec 2 2013 1:49PM
0 0
profile picture
armadaski44
Posts: 481 - Karma: 15
Cant tell if your trolling or not....
Dec 26 2013 12:57PM
0 1
All times are Eastern (-4)