Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Determining DIN

profile picture
DietCoke
Posts: 1317 - Karma: 7
I'm 5'9'' and weigh 140 pounds. I'm a pretty agressive and advanced skier skiing about 60% park 40% all mtn. Ive been skiing for about 5 years so im pretty good, but i dont know where i should put my DIN at so that my binding doesnt fall off doing stuff, but so that i dont destroy my knees.
Dec 2 2004 7:37PM
0 0
profile picture
1080bio
Posts: 2042 - Karma: 5
well what kind abinding are u gona use cause it makes a difernce espesialy if u have salomon bindings cause those should be cranked up a bit higher but for like most stard bindings ur be good at a 8 and a 10 on salomon

what happined to drugs, sex, & rock and roll...now adays we have aids crack and techno.......

GNR

Dec 2 2004 7:39PM
0 0
profile picture
DietCoke
Posts: 1317 - Karma: 7
prolly p10s
Dec 2 2004 7:53PM
0 0
profile picture
turbo_penguin
Posts: 282 - Karma: 15
I'm 5'11' and 160 and I ski similar to what you describe and I have mine on 7.5/8, they never to seem to come off when I don't want them to, but I'd rather that then mess my knee. They're rossi bindings.
Dec 2 2004 7:55PM
0 0
profile picture
nut
Posts: 625 - Karma: 12
You can always turn them up .5 or 1, then go ski. If they're still falling off, repeat. You'll soon get a feel for what you like.










Confusious say: man going through airport turnstyle sideways is going to Bangkok
Dec 2 2004 8:11PM
0 0
profile picture
eastcoastskier
Posts: 2060 - Karma: 7
go to the shop.....they know what there doing.
Dec 2 2004 8:12PM
0 0
profile picture
Ski-hobo
Posts: 7121 - Karma: 15
not to high, you dont want to break your leg when you crash. If they come off when you turn hard, just tighten them up a bit.


-------------------
Dec 2 2004 8:13PM
0 0
profile picture
bigpurplebev
Posts: 335 - Karma: 38
yes definitly go to a shop.. at the least they have a chart that basses your din on weight, age, and ability.. they also have a machine that will test the release based on height, weight, age, and ability. The ski has to pass or else they can;'t let it go.

'what are you a mountainier, hes gat ropes and shit hangin off him'



member # 5871
Dec 2 2004 8:14PM
0 0
profile picture
telestar6
Posts: 2102 - Karma: 44
Don't listen to any of the above post unless they said go to a shop, especially the one that said that Salomons need to be set higher, they're retarded. Go to shop and have them adjust it especially since your question makes it sound like you have no idea.

I think rails in general are just a phase. - Anthony Boronowski

D-loc's picture looks like a monkey smoking that cig. If you had a mug like that would you really want everyone to see it.
Dec 2 2004 8:37PM
0 0
profile picture
Justo8484
Posts: 3905 - Karma: 204
as the few intelligent people above said, go to a shop. salomon bindings have the same din scale as any other bindings. the difference is that the toe peice is adjusted to fit your boot better. if that is not set correctly, you could crank your din up to 12 and still turn out of the ski. go to a shop, spend $15 to get the bindings checked instead of thousands in hospital bills when your stuff doesnt release when it should and you tear your knees apart.
Dec 2 2004 8:40PM
0 0
profile picture
Jordan_P
Posts: 621 - Karma: 33
6'0' 180 and im on LOOK p10's_______DIN: 9...ya'll bitches!





...what's burning?
Dec 2 2004 8:40PM
0 0
profile picture
tandan83
Posts: 2783 - Karma: 141
if you do it yourself you will prolly fuck it up. go to a shop





free ipods for everyone!!!
Dec 2 2004 8:57PM
0 0
profile picture
Kev
Posts: 7411 - Karma: 35
The DIN Setting Chart

Make sure you READ THE STEPS.

Im 155lbs 6ft Type 3 skier 321 mm sole
so i should be at a din of 7. and i actually ride at 8-8.5. so it is a pretty close, and gives you a good range of where you should be.


Sponsored By Your Mom
Drop Cliff's, Not Bombs
Make Turns, Not War
Bomb Hills, Not People
Member #259
Dec 2 2004 9:07PM
0 0
profile picture
sacha
Posts: 1367 - Karma: 18
I'm 5'6', 115 Lbs and my DIN is at 6-8.

~~ PhUnKiN pHaT pHrEeRiDeRs ~~



--------> RIGHT COAST ------->
Dec 2 2004 9:22PM
0 0
profile picture
bigpurplebev
Posts: 335 - Karma: 38
oh yah another thing... if you decide to do it yourself (which isn;t a good idea if you don't know what your doing) make sure your toe and heal pieces are at the SAME DIN.. this may prevent a very much hurtin situation


'what are you a mountainier, hes gat ropes and shit hangin off him'



member # 5871
Dec 2 2004 11:02PM
0 0
profile picture
jpsnowbumb
Posts: 173 - Karma: 10
Wow the people at the shop just look at a chart dont they??

So just look at the chart that was given above.
Dec 3 2004 2:57AM
0 0
profile picture
Jib_This
Posts: 8272 - Karma: 9
^there's more to setting up bindings than just screwing your DIN to the proper setting.







Bahahaha... or, you could call it the 'elitist snob' cult. Anyways, my family already owns a country club, so no thanks.

J.D. May
Dec 3 2004 2:59AM
0 0
profile picture
Big_Willy
Posts: 2865 - Karma: 6
To get the safest setting go to a shop. A shop or binding manufacturer will never recommend this but I like to tweak it a little more, kind of test the limits of the binding. This is not safe but Im pretty sure that they will fall off when I need them to and stay on when they need to.



'I would be embarrassed to constantly complain about my life considering all the freedom and opportunities we have today. People that can't find anything they enjoy in life simply aren't giving it a real try.' ~Nick 311
Dec 3 2004 3:23AM
0 0
profile picture
Moses
Posts: 1849 - Karma: 564
i worked in a shop, they use the jig for the specific manufacture and the drill bit has a stop point, and yes, for din setting i just looked a the chart
Dec 3 2004 8:07AM
0 0
profile picture
Ryno
Posts: 31125 - Karma: 336
my salomons had to be cracked up 2 din higher then my rossis and i still fell outta them...
___________________________________________________




A view on the downfall of the US by 221: 'godzilla man. he's gonna show up and shit will hit the fan.'



ellermann -> i hope you realize you just threw yourselves a birthday party online. just think about that for a little while



Ryan V.G



~~Phunkin Phatt Phreerider~~

Dragons Lair
Dec 3 2004 8:17AM
0 0
profile picture
KeegLove
Posts: 10166 - Karma: 55
take in to a shop unless u are 100% sure whqat u want ur din to be at
SKI FOR LIFE!



If it was easy it would be called snowboarding.

WHITEWATER





Dec 3 2004 9:30AM
0 0
profile picture
telestar6
Posts: 2102 - Karma: 44
If you are having prerelease problems like Ryano that is an even better eason to have the bindings looked at by a shop. That means they need to be release tested badly. Also with Salomons the toe piece is extremely adjustable and if you don't adjust it just right it won't function like it is suppose to.

I think rails in general are just a phase. - Anthony Boronowski

D-loc's picture looks like a monkey smoking that cig. If you had a mug like that would you really want everyone to see it.
Dec 3 2004 11:02AM
0 0
profile picture
freerider54
Posts: 387 - Karma: 14
Listen to Telestar
'Say what you will about the tenets of modern socialism, at least its an ethos' -Walter Sojezch, The Big Lebowski
Dec 3 2004 11:06AM
0 0
profile picture
powderpow
Posts: 45 - Karma: 43
Crank your bindings all the way up and then a half turn back for the strongest hold.
Dec 3 2004 11:06AM
0 0
profile picture
telestar6
Posts: 2102 - Karma: 44
And don't listen to powderpow.

I think rails in general are just a phase. - Anthony Boronowski

D-loc's picture looks like a monkey smoking that cig. If you had a mug like that would you really want everyone to see it.
Dec 3 2004 11:20AM
0 0
All times are Eastern (-4)