Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

HOW DO I MAKE PVC RAILS!!!!

profile picture
snowmosexual
Posts: 1928 - Karma: 9,965
i wanna make some pvc rails like the ones andy parry and will wesson make https://www.newschoolers.com/nstv/24.0/Traveling_Circus in 1.2 welcome home. and please help me out with a drop in need ideas my backyard is flat
Oct 2 2011 5:48PM
3 1
profile picture
lukewalnuts
Posts: 2730 - Karma: 152
https://newschoolers.com/ns/cult/forum/cat_id/1453/
Oct 2 2011 5:50PM
0 0
profile picture
Supergyro
Posts: 797 - Karma: 36
I think you were looking for question marks in your title. Your welcome.
Oct 2 2011 6:38PM
0 0
profile picture
topherthegopha
Posts: 126 - Karma: 47
dont do it theyre way, take a board, cover the top with formica, then use pvc as coping on the side, make sure ur coping is like a lil above the formica surface and screw it on from the side. its perfect.

Oct 10 2011 2:32PM
1 0
profile picture
topherthegopha
Posts: 126 - Karma: 47
+k? i just made a new account
Oct 10 2011 2:32PM
0 1
profile picture
HARVERSACE
Posts: 763 - Karma: 372
that was very, very random.
Oct 10 2011 2:54PM
1 0
profile picture
HumanGenius
Posts: 359 - Karma: 228
take a big ass drill bit into the side and then a smaller one through the hole and into the wood that you want to connect it to. screw it in. do this like every 2 feet or less. take a file and soften the hole and the ends of the pipe they can wreck your bases if you fall or you dont drill it right. i suggest making a frame out of 2x4's that is triangular its really stable. also take the same big ass drill bit into the bottom of the frame and buy some 10 inch spikes to hammer into the snow or ground so the rail doesnt move if you slide off the side early. thats how i do it at least, but there is tons of ways. find some scrap wood and pipes and experiment a little i did that till i figured that out
Oct 11 2011 5:10PM
0 0
profile picture
Njens.
Posts: 1688 - Karma: 46
ask lj strenio
Oct 11 2011 5:12PM
0 0
profile picture
@tlas
Posts: 1625 - Karma: 68
i see what you did there
Oct 11 2011 7:41PM
0 0
profile picture
Parks.
Posts: 5612 - Karma: 1,093
this sounds pretty good  to me
Oct 11 2011 7:47PM
0 0
profile picture
steesuspleen
Posts: 1 - Karma: 11
well for a rail out of one piece of pvc, take like a 3x3x whatever length you want piece of wood, and screw two or three flat boards perpindicular to it. Then take a one and a half inch pipe, and for every screw hole you want to make, drill a large enough hole that you can fit you bit into it in the top of the pipe. Then stick your bit through the hole you made, and screw the pvc to the wood. Click for larger image
Oct 11 2011 8:04PM
0 0
profile picture
TheAfterBang
Posts: 189 - Karma: 10
1. Buy PVC 2. Buy wood 2x4's and shit 3. Get tools 4. Construct it 5. Wtf is it really that complicated? 6. Why is there even a 6th step?
Oct 11 2011 9:52PM
0 0
profile picture
gaper-raper
Posts: 598 - Karma: 2,602
6th step possibly actually go and use the rail?
Oct 11 2011 11:35PM
0 0
profile picture
TheAfterBang
Posts: 189 - Karma: 10
Quite a good idea my friend
Oct 12 2011 6:45AM
0 0
profile picture
SKIU4EA
Posts: 2387 - Karma: 2,072
huh? did u just ask for karma? that's funny to me
Oct 12 2011 7:18AM
0 0
profile picture
Otter.
Posts: 1161 - Karma: 84
1. go to lowes/home depot
2. buy a shit ton of materials
3. ???????????????
4. Profit
Oct 12 2011 8:31AM
0 0
profile picture
tdollo
Posts: 3744 - Karma: 17,995
Just take a 2x4 and screw the PVC on it. How did you not think of that you retard.
Oct 12 2011 8:55AM
0 0
profile picture
TheAfterBang
Posts: 189 - Karma: 10
You forgot to mention that he has to put french fries in the pvc and attach eggs at the end of the rail. Otherwise it wont work
Oct 12 2011 7:27PM
0 0
profile picture
steezenskis
Posts: 1044 - Karma: 31

sorry to jump on you but how helpless are you? youtube that shit. theres a million vids on exactly this.

Oct 12 2011 8:13PM
0 0
profile picture
CRiP
Posts: 1323 - Karma: 482
1. drive to home fucking depot
2. buy pvc and shit
3. put that shit together
4. jerk off
5. wait for snow
6. session that bitch
7. repeat step 4 if necessary
Oct 12 2011 9:23PM
1 0
profile picture
.R-Lohin
Posts: 1686 - Karma: 117
Id like to direct your attention to the build a jib cult
Oct 13 2011 1:01PM
0 0
profile picture
GNARwalls
Posts: 1287 - Karma: 528
i don't believe that profanity was nessisary. but i do agree with #7
Oct 13 2011 1:33PM
0 0
profile picture
momentz
Posts: 875 - Karma: 285
Tape a piece PVC pipe to the ground!!
Oct 16 2011 1:25AM
0 0
profile picture
coldcuts69
Posts: 3718 - Karma: 1,890
the fuck? wrong thread?
Oct 16 2011 1:35AM
0 0
profile picture
Montana_Hoodrat
Posts: 1953 - Karma: 1,481
put wood in the pvc pipe so you can screw into it. Mine came out pretty nice:

Click for larger image
Oct 16 2011 1:46AM
0 0
profile picture
jlien593
Posts: 25 - Karma: 15
Build wooden box and drill a thick pvc and build a drop in ramp and lay it with turf. I had three when i used to live in vegas
Oct 16 2011 2:11AM
0 0
profile picture
Blake.P
Posts: 9894 - Karma: 3,585
It's not that complicated. Build a frame out of 2x4's and attach PVC pipes to the top. It took ms like 30 minutes to build one without any directions
Oct 16 2011 2:37AM
0 0
profile picture
ilikefood
Posts: 391 - Karma: 769

Click for larger image

One my buddy made by himself. It's pretty sick.

Oct 16 2011 2:46AM
0 0
profile picture
snowmosexual
Posts: 1928 - Karma: 9,965
Thanks wht about any like jibs or fun stuff to fool around on?
Oct 16 2011 12:08PM
0 0
profile picture
Montana_Hoodrat
Posts: 1953 - Karma: 1,481
the 5 gal. bucket in the pic above looks perfect if you ask me!
haha but seriously you could use anything you don't mind falling on.
Oct 16 2011 12:29PM
0 0
profile picture
scarsimd
Posts: 668 - Karma: 773
do pvc rails feel like proper park rails?

Mar 18 2012 6:49AM
0 0
profile picture
NEEDMOSNOW
Posts: 344 - Karma: 39
No
Mar 18 2012 8:31AM
0 0
profile picture
saskskierftw
Posts: 898 - Karma: 62
If you ask me, I'd say yes.
Mar 18 2012 8:54AM
0 0
profile picture
james6345789
Posts: 4763 - Karma: 465
I feel like it slides more like a box, but it's skinny like a rail.
Mar 18 2012 10:21AM
0 0
All times are Eastern (-4)