Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Stoner NS: Problems With a New Ashcatcher

profile picture
Shlogan
Posts: 4942 - Karma: 430
Just spent a good amount of money on a brand name 6 arm tree perk ashcatcher for my straight tube bong. Problem is, the joint does not quite fit in the downstem and i am really frustrated by this.

Is there a male and a female connection? do i need an adaptor? not sure on exact size of both but im assuming they are both 14.5mm, neither are very large. Also got a seporate slide, and it is the same size as the ashcatcher. Wish i was in the 420 cult but no such luck, any help would be great.
Sep 28 2011 9:37PM
0 0
profile picture
Billek
Posts: 5665 - Karma: 98
I'll send you an invite to the 420 cult.
Sep 28 2011 9:40PM
0 0
profile picture
iggs
Posts: 827 - Karma: 39

just got my mflb and let me just say its too good. well worth the money

Sep 28 2011 9:45PM
0 0
profile picture
yuck
Posts: 8384 - Karma: 2,090
there are different sizes of joints, 14mm or i guess 14.5 mm and i know they get bigger up to 18mm (dont quote me on that)

im sure you could get some sort of adapter or o-ring to make it work, but its always a good idea to make sure your ac will work in your piece and the bowl and all fits.

420 forum will definitely help you out. i know pretty much nothing about glass haha but they do. you have any problems with rolling joints, let me know lol
Sep 28 2011 9:45PM
0 0
profile picture
Shlogan
Posts: 4942 - Karma: 430
that would be perfect, thanks.
Sep 28 2011 9:46PM
0 0
profile picture
Panchuk
Posts: 1610 - Karma: 355
I've had this happen before. Usually with poorly made glass and two different brands that don't have a very well known name. They could both be labelled as 14.5mm but have a slightly different fit that doesn't allow them to be used together.
Sep 28 2011 10:14PM
0 0
profile picture
baethoven
Posts: 4953 - Karma: 332
just go to your local headshop and ask for a converter piece. You need to figure out which part is 18mm and which is 14mm, and ask for a converter piece accordingly. I have both a 18mm - 14mm , and 14mm - 18mm (which is actually a carbon filter extension piece http://aqualabtechnologies.com/glass-accessories/carbon-filters.html.)


Hope that helps a little.
Sep 28 2011 10:27PM
0 0
profile picture
Shlogan
Posts: 4942 - Karma: 430
this sounds like the most logical response so far. i shopped around for a while before i bought this one so i definitly got accustomed to telling the difference between 14 and 18, obviously i got the one i thought was 14 but it still is too big. Could be an even bigger pain if the downstem really is just an off size and neither of the two normal dimentions, because a converter may not exist. keep the responses coming, need all the input i can get!
Sep 28 2011 11:41PM
0 0
profile picture
Balto
Posts: 25985 - Karma: 4,398
post pics of your stem and the joint on the AC
Sep 29 2011 12:00AM
0 0
profile picture
BikeMlatt69
Posts: 1947 - Karma: 60
could i get an invite to the 420 cult as well please? been tryin to get in forever
Sep 29 2011 12:37AM
0 0
profile picture
BdoubleU
Posts: 880 - Karma: 291

there is 14 and 18 as stated.

you can easilly fix this with the adapter from _ to _ for pretty cheap (probably like 40 bucks max?)

Sep 29 2011 12:43AM
0 0
profile picture
Panchuk
Posts: 1610 - Karma: 355
Word, it seems like you know what your'e doing so I don't think you would buy an 18mm ash-catcher. You're in a shitty situation where either your downstem female is to small or the male on the AC is to big. Maybe a mm off each and they don't fit. Sadly, there isn't much you can do. You'll figure it out though hopefully.
Sep 29 2011 9:03AM
0 0
profile picture
bo0b
Posts: 2964 - Karma: 994
.
Sep 29 2011 9:08AM
0 0
profile picture
yuck
Posts: 8384 - Karma: 2,090
one does not simply walk into 420 forum


i actually waited for a year probably before i got in
Sep 29 2011 1:51PM
0 0
profile picture
Flying~Squirrel
Posts: 6494 - Karma: 192
could you send me an invite as well?
Sep 29 2011 1:54PM
0 0
profile picture
JamesR
Posts: 3396 - Karma: -12
If i had a dollar every time this happened..
Sep 29 2011 1:59PM
0 0
profile picture
iSmokeweed
Posts: 4793 - Karma: 1,370
you gotta know your diffuser size before you buy an ashcatcher.

but i also have a 6 arm ashcatcher. very nice.

helps out the other 12 arms...
Sep 29 2011 2:06PM
0 0
profile picture
yuck
Posts: 8384 - Karma: 2,090
/claim
Sep 29 2011 2:14PM
0 0
profile picture
SkiThe603
Posts: 5376 - Karma: 498
mind if i get one of those as well
Sep 29 2011 2:16PM
0 0
profile picture
SirFryanator
Posts: 11149 - Karma: 1,415
this sounds ridiculously complicated for be a stoner issue lol
Sep 29 2011 2:20PM
0 0
profile picture
steezeknees
Posts: 819 - Karma: 9
Dont judge all stoners just because you know some stupid motherfuckers.
Sep 29 2011 3:09PM
0 0
profile picture
SirFryanator
Posts: 11149 - Karma: 1,415
I'm judging the FUCK out of you best believe dat
Sep 29 2011 3:32PM
0 0
profile picture
steezeknees
Posts: 819 - Karma: 9
You best go fuck yourself then.
Sep 29 2011 3:36PM
0 0
profile picture
Dirtyyy
Posts: 206 - Karma: 55
I would love an invite. especially times like this when I can gaze my eyes upon those crystally crystal thc crystals and ski through powder on white widow.
Sep 29 2011 11:40PM
0 0
profile picture
Shlogan
Posts: 4942 - Karma: 430
This wasn't supposed to be an invite thread to the 420 cult, i haven't even gotten one although it would be very helpful. bump
Sep 29 2011 11:42PM
0 0
profile picture
gnarshrelpt
Posts: 572 - Karma: 15
you need a converter most likely. shouldnt be too hard to find. its always best to know the size of the piece before you buy an attachment
Sep 30 2011 12:57AM
0 0
All times are Eastern (-4)