Member of the Month

GayWolf420
June, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Re: the article Mauii\'s Hot Waxing Guide

profile picture
BrodyLeven
Posts: 7016 - Karma: 187
if anyone cares- another tip

instead of going right from the scraper to scotch brite, i actually got a Swix brush (any hard bristled, nylon(i believe) brush will do) and use that as much as i can after the scraper, to have a middle step from the scraper and scotch brite.
so i go
scrape
brush
scotch brite

make sure you spend a lot of time of each

hope this helps! the idea is also to save you more scotch brite.
Brody

'I promise i won't drop out of high school mom'-Me
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
who uses scotch brite???? ask anyone who has to wax skis for some sort of race (x-c skiing) it's wax, scrape, nylon brush (you got that part right) then buff the hell out of it with panty hose (clean ones...preferably new, and ball it up and use the same spot all the time) it'll make your skis fast....DAMN ASS HELL FAST
23 years ago
0 0
profile picture
Pipe_Munky
Posts: 10888 - Karma: 2,185
nylon brush? that ain't gonna do shit for you! you need a had metal brush. the whole purpose of the brush is to make a tracking line for the water under your skis




SKI SPECTACULAR TALISMAN MTN. RESORT
23 years ago
0 0
profile picture
mauii
Posts: 6166 - Karma: 32
my ski store uses scotchbrite..they game be some for free even

********************
'mauii has got to change his sig.. everytime i see it. i think hes quoting me or something..... yeah im dumb' - Canadian_kicker
23 years ago
0 0
profile picture
yeti
Posts: 6335 - Karma: 17
NEVER use a brass brush after you wax, it defeats the purpose of waxing as it just strips the majority off.

You can use a nylon very lightly or ever better get a horsehair brush and give it shit.


'I am going back online. I feel safe there.' - Piot Modrak aka lord_piot
Frostmonkey

23 years ago
0 0
profile picture
Tele-Jibber
Posts: 2278 - Karma: 12
'nylon brush? that ain't gonna do shit for you! you need a had metal brush. the whole purpose of the brush is to make a tracking line for the water under your skis'

WTF are you talking about?!?!?!!? it's just to help polish the bit of wax that isn't into teh base. If you use a brass brush you have probibly already ruined your skis bases.



Taylor
Tele-Jibber
~ Phunkin' Phatt Phreerider ~
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
the brass brush removes too much wax...the nylon brush if for polishing the wax...making it smoother and thinner (less wax means go faster) if you wanna structure your ski, get it stone ground with a diamond cross pattern...of couse, different snow conditions means different structure...wet = hella structure...pow = none required...trust me on this...like i said in a different thread...my team spends an average of 2 grand on wax for 5 people for a 2 day comp...we know what we're doing
23 years ago
0 0
profile picture
LineJono
Posts: 1010 - Karma: 16
a brass brush is used when you wax with a very hard or cold wax, the nylon brush is for warmer wax, the brush isn't meant to help the water channel under the base thats what a grind is for. The wax itself is what deflects the water from your base, and on a cold day the wax reduces static between your ski base and the snow. so if you don't know shit keep your mouth shut.
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
reduces static between the snow and your skis??? sounds like you dont know shit, so keep your mouth shut...and the brass brush would destroy hard wax (cold wax as you call it) brass is for cleaning, or maybe one pass to get a little more off than the nylon (a little quicker) then you get into high fluoro and low fluoro waxes, etc....but i'm too lazy to explain
23 years ago
0 0
profile picture
powder99
Posts: 2761 - Karma: 12
sorry guys but, what are you saying about taking all the wax off? Of course you have to take all the wax of, you wax your skiis and let them sit for a couple hours then you scrap them and brush them, you can use a horse hair, nylon and a wire brush, it doesn't wreck your bases. Also for high flurio's and speed wax you cork the wax into your base and it ussulay only last a run or two. But what would i know, i only race tune my skiis every night during the whole winter
___________________
Paulou
Call me the bus driver cause im going to take you to school
23 years ago
0 0
profile picture
mauii
Posts: 6166 - Karma: 32
haha..u do? too much time on ur hands?

********************
'mauii has got to change his sig.. everytime i see it. i think hes quoting me or something..... yeah im dumb' - Canadian_kicker
23 years ago
0 0
profile picture
powder99
Posts: 2761 - Karma: 12
not to much time, but you have to keep your skiis in good shape, it just starts to be a habit after a day of skiing. Having a good piar of tuned skiis makes a big difference
___________________
Paulou
Call me the bus driver cause im going to take you to school
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
actually, you wanna leave a little bit of wax on...that's what makes skis go down the hill...but the wax you want on there is only supposed to be a couple molecules thick...so getting it all off isnt good...leaving it all on...also not good...and the only people who cork wax on their skis is x-c skier with kick wax...you can use a cork to buff wax, but nylon pantyhose is better...and high fluoro and low fluoro waxing is done the same as regular wax....there's special shit like cera F and streamline you can put on after....but that's totally different
23 years ago
0 0
profile picture
powder99
Posts: 2761 - Karma: 12
sorry but obviosly you don't know much about ski tunning for races, cause for speed wax you sometimes have to rub it onto your base then cork it in. Also the wax that gets scraped off your skiis is the wax that didn't get absorbed into your base, if you scrap your skiis untilll no pieces of wax come off your ski there is still wax in your base
___________________
Paulou
Call me the bus driver cause im going to take you to school
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
i know you moron...that would be the molecule layer i was talking about...damn it...and no one corks anymore...pantyhose works way better, becuase corking just gets the wax on the cork...then you rub some old wax, stuck on the cork, into your skis...trust me...everthing i've learned came straight from the finnish and check wax techs...these guys get paid like 50 thou a year to wax...i'm gonna take their advice over yours
23 years ago
0 0
profile picture
powder99
Posts: 2761 - Karma: 12
do you race? corking wax in your ski is still used by a lot of people.
___________________
Paulou
Call me the bus driver cause im going to take you to school
23 years ago
0 0
profile picture
Beanzerelly
Posts: 208 - Karma: 10
i have to say paulou is right! alot of ppl still cork and some may use panty hose but whatever you decide to use then it's your choice! but just scrap all the wax off your ski and if you want really good tuned skis then try to tune them after a ski session!


_________________
your friendly newfie
23 years ago
0 0
profile picture
PocketRocket
Posts: 1251 - Karma: 10
i dont race...but i'm on the national development team for ski jumping...i've placed top 10 in north america, top 3 in canada....the waxing we do is VITAL to our success...in our sport, .25 of a km could mean the difference between 5th and 30th....racing is alot more technical, all your turns have to be good, blah blah blah....but according to the highest paid wax tech in the world....corks collect dirty wax, and then rub that into your skis, which you dont want...unless you use a new cork each time...then go for it, but a new pair of pantyhose for 3 bucks that'll last you a month is a litte more worth it
23 years ago
0 0
profile picture
line__skis
Posts: 549 - Karma: 10
take it from an X racer... you use a hard bristle brush to put small grooves in the ski... the small grooves (virtually invisble to the eye) allow the air and the wax on ur skis to react with the snow... you use flurocarbon wax, that is a standard wax, the way it works is it works with snow air and water, they help you go faster, without the grooves its fine but if u want to fly... u need the grooves

23 years ago
0 0
profile picture
Ghost
Posts: 7118 - Karma: 341
I am confused, the only thing I remember is something about pantyhose.

Eat. Sleep. Breathe. Ski.
23 years ago
0 0
profile picture
Ghost
Posts: 7118 - Karma: 341
I am confused, the only thing I remember is something about pantyhose.

Eat. Sleep. Breathe. Ski.
23 years ago
0 0
profile picture
Jibtech
Posts: 2523 - Karma: 227
PocketRocket, you seriously still come on this site and open your mouth?
23 years ago
0 0
profile picture
MadTrixter
Posts: 3262 - Karma: 8
yea, i still cork
here's what i do:
wax...scrape...cork


*Proud Member of the HoBum Posse

Viva la Resistance!

'theres much worse things that the police should worry about than a little peice of shit kid that cant handle being duct taped to a pole.'
-lineski1260
23 years ago
0 0
profile picture
mammothpunks
Posts: 5724 - Karma: 372
i waxed my skis once.... but that was back in the 'dark times'


'I should put my camera on a tripod - its easier to drink beer that way' - dirty steve
23 years ago
0 0
profile picture
Jibtech
Posts: 2523 - Karma: 227
When I first saw the title of this thread I thought it was about the removal of unwanted body hair.
23 years ago
0 0
profile picture
Phrosty
Posts: 9956 - Karma: 18
wait,.. it isn't? damn I bought all that pantyhose!


Oh, shit I spelt something wrong? Fuck you cocksucker!
Jesusjr.com
The day isn't complete without a good texan checkin' session
Wasted State Represent!!
I like my boots like my women, rear entry.
23 years ago
0 0
All times are Eastern (-4); Currently it's 9:36AM