Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Look Pivot questions.

profile picture
PG_EDA
Posts: 472 - Karma: 786

Hi Im wondering about what bindings to put on my new armada t-halls. At first i was planning on puttin a pait of look px 12 jibs, that i have from before, but i feel that i want a binding with a higher din. I have been looking at the new look pivot 14s, and i have previously had the old look pivot 12s and they have been the best binding i have had. Beats my sth 12s by a long shot!

So my main questions are what is the difference between the new pivot and old pivot? are the new pivots just as good better etc? are they a good binding? bascialy what is your opinion about them from your use etc.

Info bout me: Im 1.76 m (around 5.10ft) tall, around 85-90 kilos, i usualy ride a pretty high din, because i have had problem with pre-release on my STH bindings. I have a pair of unmounted 171 armada t-halls that im going to mount on them. I ride mostly park, some pow, but i love pressing and rails and jumps in the park.

I hope this isnt a massive repost or anything, i searched for a little bit but didnt find anything very helpful.

Thanks for the help! :)

Nov 28 2010 2:33PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
the new pivot 14 has a px style toepiece, whereas the old fks 155's and such had a different toe piece, that is the only difference as far as i know, that and they dont make a fks 12 anymore
Nov 28 2010 2:38PM
0 0
profile picture
PG_EDA
Posts: 472 - Karma: 786
Thank you for that response. +K
Nov 28 2010 2:53PM
0 0
profile picture
CTD
Posts: 6300 - Karma: 348
talking about two different bindings.

Rossi FKS / Look Pivot 14/18s are turntable bindings, with the threaded metal rods on the heel, tons of metal, lightweight. These are the highest performance, race oriented models.

Rossi Axials / Look Pivot 10/12/14s are the oldschool "consumer" version of the turntable. Awesome binding, ride great, prone to getting a little sloppy after a few years of hard use, but still work.

Rossi Axial2 / Look PX are the new ones, and they all suck. dont waste your money with these. Ive ranted about it before, not gonna get into it. but trust me on this one.

Bottom line, go with the new turntable 14s, or if you have your eye on a pair of nice looking old Pivots (not beat up), go for those. both are solid options, and youll be happy.
Nov 28 2010 4:08PM
0 0
profile picture
PG_EDA
Posts: 472 - Karma: 786

Alright thanks alot for that! +K

but if i have the choice between a pair of almost unused px12jibs, and a pair of fairly used look pivot 12s (old ones) i should go with the pivot 12s ?

Nov 28 2010 5:01PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,168
Go with the Pivot 12s. The turntable is just so much better than the heel piece on the px jibs.
Nov 28 2010 5:18PM
0 0
profile picture
PG_EDA
Posts: 472 - Karma: 786
alright cool thanks a ton!
Nov 28 2010 5:25PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
Is it the heel piece that looks like a dildo? Or the fks heel piece
Nov 28 2010 5:47PM
0 0
profile picture
Bumblesteeze
Posts: 3092 - Karma: 748
They both look like dildos.
Nov 28 2010 5:52PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
Click for larger image

Click for larger image

top or bottom

i think the second one looks more like a dildo
Nov 28 2010 6:00PM
0 0
profile picture
PG_EDA
Posts: 472 - Karma: 786
yea the heel peice looks like a dildo, well sorta with some creativity. but yea sapposed to be real solid bindings.
Nov 29 2010 3:59AM
0 0
profile picture
HIRO
Posts: 548 - Karma: 34
what's wrong with the px12 jibs?
Nov 29 2010 11:45AM
0 0
profile picture
Toasty.
Posts: 6195 - Karma: 2,278
this is a question about my jib 12s. i went off a little side booter in austria and did a 180, but there was like a 5 foot rock drop after it, and when i went off it and landed my ski came off, and when i look at the toe piece it was at a 90 degree angle. is that supposed to happen. i slamed it back into place so i could keep skiin, but it pops off alot now. any help??
Nov 29 2010 11:45AM
0 0
profile picture
alexat955
Posts: 2732 - Karma: 112
If you got lucky you just ripped out a screw and you can epoxy the hole and put the toepiece back in. If you're unlucky you fucked up your toepiece and you need a new one or new bindings
Nov 29 2010 11:55AM
0 0
profile picture
Toasty.
Posts: 6195 - Karma: 2,278
i hope, i got like 6 inches of snow last night and so i made a little jib in my backyard, and like every time i jumped it poped off.
Nov 29 2010 12:24PM
0 0
profile picture
pigglywiggly
Posts: 4482 - Karma: 305
sooo youre saying that the old fks12's will break down in a few years as where the new fks14 will be fine?
Nov 29 2010 12:38PM
0 0
profile picture
Rockhound
Posts: 3432 - Karma: 851
He was talking about the p12s which are not fks, the p10-14 are not bad bindings but they are not the same design as the fks design... It I'd just confusing because look named both bindings the 'pivot'
Nov 29 2010 2:05PM
0 0
profile picture
Kev-Kev.
Posts: 680 - Karma: 34
I love my old P14's. Had them for a few years and they're still beast.
Nov 29 2010 4:02PM
0 0
profile picture
alexat955
Posts: 2732 - Karma: 112
Take the toepiece off and look at the hole in your ski to see if you ripped it out
Nov 29 2010 4:36PM
0 0
All times are Eastern (-4)