Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What should i do about this?!?!

profile picture
mnfreeskier
Posts: 939 - Karma: 67
hey guys. i have had these a-bangs for a few months but only skied them 3 days. i just started to love them when i hit a rail badly. i wasfine but my ski is not even close. take a look at the damage.Click for larger imageClick for larger imageClick for larger imageClick for larger image do you guys have any suggestions on what to do about getting a new ski? or any other options? i talked to my local shop guy and he said since its in the tip there is nothing he can do. i really need to ski or i might go insane. thanks for the help! +k for good help and bumps
Nov 27 2010 10:12PM
0 0
profile picture
HiTz
Posts: 1467 - Karma: 11
dam dude that's rough. I'd try another shop and see if they can do some emergency repair, it's prolly going to cost you like $120 though.
Nov 27 2010 10:23PM
0 0
profile picture
BrewskiJr
Posts: 5738 - Karma: 1,478
get in contact with line and see if they can do something about it. Thats really rough man. +vibes
Nov 27 2010 10:27PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
thanks guys +k
Nov 27 2010 10:32PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
bump
Nov 28 2010 1:04PM
0 0
profile picture
JIBpsy^^
Posts: 2851 - Karma: 36
contact Line they claim that thier skate deck construction is bomb proof they might just replace it for you
Nov 28 2010 1:08PM
0 0
profile picture
gus555
Posts: 4170 - Karma: 34
damn dude that sucks, it seems like the a bang duribility is kinda hit and miss, sucks hope line sends you new skis
Nov 28 2010 1:12PM
0 0
profile picture
Grilledsteeze212
Posts: 211 - Karma: 137
see if they will warranty your skis
Nov 28 2010 1:18PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Thats impact damage, you said it yourself. Most companies wont cover that, they'd be crazy if they did, but I'd give it a shot anyways. Just be really nice and considerate in the email and include those pictures.
Nov 28 2010 1:43PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
thats what i am afraid of. i am hoping they have a spare 166 from last year that they will sell to me but i dont know. i sent them an email yesterday and so far they havent emailed back but i gotta give em time i guess
Nov 29 2010 4:20PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
bump
Nov 29 2010 6:24PM
0 0
profile picture
brakes
Posts: 457 - Karma: 11
try and get line to throw you a bone first like the other guys said, then see how much a shop repair would cost, and if its too expensive for you just epoxy the shit out of it and hope
Nov 29 2010 8:45PM
0 0
profile picture
joshua
Posts: 5046 - Karma: 1,280
Mabeye try JB welding it?
Nov 29 2010 8:47PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
What's that???
Nov 29 2010 11:22PM
0 0
profile picture
DMan-II
Posts: 106 - Karma: 35
its a 2 part epoxy you can buy at auto stores that gets really hard. Lots of guy use it on cars to ghetto rig parts.
Nov 30 2010 2:22AM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
okay sweet!
Nov 30 2010 4:36PM
0 0
profile picture
pdxplanker
Posts: 137 - Karma: 53
damn that sucks, if you cant find a place to fix it for you and LINE wont exchange you would either have to buy a new ski or ghetto rig it. the JB weld was a good idea, or there is a gorilla glue that is crazy strong. i would get some of that, some clamps/vice grips and fill the gap with the glue/weld and clap it shut overnight. just make sure you dont get any on the bottom of your skis, if some comes out of the crack in the bottom there than take a credit card or some thin sharp edge and immediately scrape it off and clean the area.

ghetto as fuck, but it might work. JB weld is some crazy strong shit.
Nov 30 2010 5:20PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,168
I am sure that your shop could do something about it. They are jsut lazy if they dont even try to fix it.
Nov 30 2010 5:25PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
i took it to them and they said they could only epoxy it and it would maybe hold 3 days or so.
Nov 30 2010 7:16PM
0 0
profile picture
ReetsAdeets
Posts: 1531 - Karma: 611
The JB Weld is a great idea, do that. That stuff is unbelievably strong.
Nov 30 2010 10:04PM
0 0
profile picture
steezenskis
Posts: 1044 - Karma: 31
your local shop has all the tools to epoxy it almost like new. my shop charges like ten bucks to do it. it pretty simple.
Nov 30 2010 10:46PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
im really considering shipping them to line and seeing if they will give me a new pair on warranty because 1 i wasnt going fast
2 it shouldnt just fall off the core like that
and 3 i have a smaller pair of skis and maybe i could get better at rails while they are evaluating the afterbangs.
lemme know what u think
Dec 1 2010 6:00PM
0 0
profile picture
Kreech
Posts: 4178 - Karma: 3,024
IF you get it fixed instead of just getting a new ski, you should have it remounted backwards, itll look cooler and you wont have to worry about breaking it when nosebuttering, cuz the ski flexes more when you nosebutter...
Dec 1 2010 7:46PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
now THAT is a sweet post! thanks dude!+k!
Dec 1 2010 9:30PM
0 0
profile picture
Grilledsteeze212
Posts: 211 - Karma: 137
ya thats sounds like a good idea
Dec 1 2010 10:28PM
0 0
profile picture
i.am.green.man.
Posts: 220 - Karma: 48
this and talk to them in a not pissed off way. and you should get good results
Dec 1 2010 10:34PM
0 0
profile picture
dylan.r.1080
Posts: 161 - Karma: 10
If I couldn't get a warranty I would jb weld and rivet it. That was a good call about mounting it backwards.
Dec 1 2010 10:42PM
0 0
profile picture
Sam.Carson
Posts: 2884 - Karma: 35
talk to line. skis shouldnt break that easy so quick. there should give you some leverage maybe a big discount on new afterbangs.
Dec 1 2010 11:01PM
0 0
profile picture
mnfreeskier
Posts: 939 - Karma: 67
how would i rivet it??
Dec 2 2010 6:30PM
0 0
profile picture
dylan.r.1080
Posts: 161 - Karma: 10
it depends on what you have acess to. but you would drill a couple holes through the ski and use washers on either side, pop rivets would be better than nothing but see if you can get someone do it with real rivets, like someone in sheet metal fabrication.
Dec 2 2010 6:46PM
0 0
All times are Eastern (-4)