Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I am making a box

profile picture
Oh_So_Hyphy
Posts: 870 - Karma: 15
I already put this in "Built a Jib" but didn't get any feed back. Does anyone know the price of HDPE about 12ft by 1ft and where i can buy this material.



+K for good answers
Oct 18 2010 6:43PM
0 0
profile picture
rickety_cricket
Posts: 909 - Karma: 34
Im looking at some prices now and a 2 foot by 1 foot piece runs like 20 bucks. So if the price is the same itl be about 120 bucks
Oct 18 2010 6:46PM
0 0
profile picture
Spillway_East
Posts: 1127 - Karma: 374
I don't know if you have made up your mind on using HDPE or not, but it's really hard to find and mad expensive. If I were you I would use composite decking and just lay two of them side by side. Good luck on whatever you do though.
Oct 18 2010 6:49PM
0 0
profile picture
MAPLE_SYRUP
Posts: 1910 - Karma: 68
Go to your local ice rink and see if they have any side wall material that they don't need. you might luck out and end up spending nothing, or they will tell you to fuck off but it's worth a shot.
Oct 18 2010 6:51PM
0 0
profile picture
EC-Skier
Posts: 3899 - Karma: 668
works perfectly, especially if you put wax on it also
Oct 18 2010 7:02PM
0 0
profile picture
BlackieChan
Posts: 1474 - Karma: 193
Sometimes if you're lucky you can find extra pieces of puckboard at the ice rink and if the people there are chill they'll just give you some/as much as you need depending on the people. Thats what me and my buddies did when we built a jib a couple years ago.

Good ruck
Oct 18 2010 7:19PM
0 0
profile picture
Zap
Posts: 39 - Karma: 10
http://www.interstateplastics.com/plastic-sheets-details.php?sku=HDPBE&thickness=0.375&dim2=12&dim3=24&utm_source=froogle2&utm_campaign=froogle2&utm_medium=na&utm_content=sheet-HDPBE
Oct 22 2010 2:06AM
0 0
profile picture
theabortionator
Posts: 51263 - Karma: 157,455
Your box gonna suck anyway. Figure it out. Shit really isn't complicated.
Oct 22 2010 4:49AM
0 0
profile picture
Gstrong
Posts: 4776 - Karma: 518
homehardwear
Oct 22 2010 5:39AM
0 0
profile picture
Evilchris
Posts: 2090 - Karma: 43
hdpe really isn't worth it for your first box. just pick up 4 small PVC pipe from a hardwear store for under 10 bucks, vs. over 100 for hdpe
Oct 22 2010 6:25AM
0 0
All times are Eastern (-4)