Mini Snow Gun design help

I found a video on youtube that showed a fully working snow gun very similar to one you would see at a resort.

I would like to try and make one of these.
Used the search bar found some posts about it but I'm looking for something a little more specific to what I'm trying to do. With success I will definitely post plans and supplies needed to make the unit.

The concerns I have are with the power needed by the air compressor and pressure washer. Maybe someone who knows how these work a little better then me....

Here is my basic idea...

The back bone of the project will be an industrial fan. Found one at harbor freight for 70$ that for now seems like it might do the job.

http://www.harborfreight.com/8-inch-portable-ventilator-97762.html

I have a man made lake in my back yard so I want to get a pump that will draw water. (the lake is big enough and spring fed the water level will never go down from the little amount I will be drawing.) I have done a little research and your house hold water hose pulls about 10 GPM (gallons per minute)= 600 GPH (Gallons per hour). So I would need something close or more then that depending on the amount of snow I would like to make.  The water pump I selected pushes 900GPH.

http://www.harborfreight.com/3-4-quarter-hp-1-inch-shallow-well-pump-with-pvc-pump-housing-47907.html

Now that I have a pump that will feed the pressure washer I need to buy a electric pressure washer so the system doesnt have to run on gas... unstable.
open to suggestions for this part.

I have an air compressor at home. It seems to be a decent size so for testing I hope it is enough.

Now I want to bend a pipe around the fan and put the nozzles on the pipe...

That's the very basic idea. Any help or suggestions will be greatly appreciated.

Thoughts?