Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Perfect drop in for summer setup - works perfectly

profile picture
*brian
Posts: 189 - Karma: 29
This is the drop in that i made

SUPPLIES:
8 8ft. 2x4's
2 Sheets - 4x8 plywood
Roofing Nails
Spike Nails
4x12 roll of turf

***** For the base of the flat part you take off from i used milk crates, supports made of anything will work... AND MAKE SURE PLYWOOD IS AT LEAST 3/4 in thick

Make the drop in 4 ft tall with braces at the top, middle, and bottom of the posts.

Make a support beam across the top of the drop in and cover it in plywood

Click for larger image

this all cost me about $65 at home depot

ALSO THIS GIVES YOU WAY MORE SPEED THAN YOU NEED FOR THE RAIL I HAVE, SO I'M BUILDING A NEW ONE TO ADD TO THE END SO I'D SAY YOU HAVE ENOUGH SPEED FOR A 25 FOOT PVC RAIL


+k for bumps

feel free to ask question


Can post more pictures and plans per request

May 10 2010 10:53AM
0 0
profile picture
Zvarenza_724
Posts: 206 - Karma: 13
how could you get that much speed it is so small
May 10 2010 5:48PM
0 0
profile picture
-AP-
Posts: 819 - Karma: 335
looks solid but it doesn't look to have any pop for spinning onto rails.
May 10 2010 8:27PM
0 0
profile picture
HalfandHalf
Posts: 1216 - Karma: 207
thats exactly how i want to build mine, thanks for posting this.
k
May 11 2010 12:14AM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
its 4 feet tall and if you nail the turf down taught to the wood then it goes faster. and for pop i added a piece of ply with a two by four at the end undder the turf so there's a lip
May 11 2010 9:36AM
0 0
profile picture
i0z
Posts: 896 - Karma: 40
how long is the rail you have now?
May 12 2010 6:05PM
0 0
profile picture
406in
Posts: 18 - Karma: 9
bump
May 12 2010 8:47PM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
the rail is abooooooot 11 feet at the moment, i think..... maybe, somewhere in the 10-11 range

and +k fo tha bumppsss
May 12 2010 10:48PM
0 0
profile picture
HalfandHalf
Posts: 1216 - Karma: 207
edit soon?
May 13 2010 2:41AM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
i can get an edit up this weekend prolly. got lax erry day till then
May 13 2010 12:32PM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
ID LIIKE TO PUT IT OUT THERE THAT YOU ONLY HAVE 25 FEET WORTH OF RAIL SPEED STARTING FROM THE TOP WITH A PUSH OFF ^^^^^^^
May 13 2010 12:36PM
0 0
profile picture
tinkytwinky
Posts: 2429 - Karma: 1,440
how high is your rail?
May 20 2010 7:58PM
0 0
profile picture
WVskiing
Posts: 3007 - Karma: 1,948
do you lube i up
May 22 2010 4:27PM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
rail's like 14 inches, im making the flat part like 3 feet longer, adding a lip, and making a down part of a rail to connect thus creating a down flat

and if by lubing up you mean soap and water than yeh, sometimes, most times just water is more than enough speed with tight turf
May 22 2010 8:17PM
0 0
profile picture
LAME.
Posts: 5795 - Karma: 2,448
ZOMG looks so sick!
May 30 2010 6:00PM
0 0
profile picture
Da_CONK
Posts: 528 - Karma: 93
Bump, would like to see pics / an edit. Mabye plans on how you built it, it might be something I can tell how to build just by looking at pics but the one you posted in the thread doesn't work so I don't know.
Jun 5 2010 8:24PM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
im pretty confident it does work because everybody else that commented has seen it... and yeh, i have to work tomorrow until noonish but then i can hit it and get a quick edit up
Jun 5 2010 9:57PM
0 0
profile picture
DADDYlongLEGS
Posts: 1574 - Karma: 47
I can't see it either
Jun 6 2010 5:21PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
edit anytime soon? i want to buid a new one, and this looks exactly how i want to make mine.
Jun 12 2010 4:02PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
oh yea, and how long is your ramp, and how long is the tranny?
Jun 12 2010 4:11PM
0 0
profile picture
eddy9
Posts: 383 - Karma: 216
Could you do a vid or something on how you assembled it
Jun 15 2010 3:33PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
he already built it
Jun 15 2010 3:54PM
0 0
profile picture
eddy9
Posts: 383 - Karma: 216

More plans please

Jun 18 2010 11:26AM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
i made mine just like this, it's not very hard. i made my ramp, 7-8ft and the flat part is 3ft long, and for the tranny, i just used thin plywood and just curved it.
Jun 18 2010 12:39PM
0 0
profile picture
eddy9
Posts: 383 - Karma: 216
Wat did you do to clamp the plywood wen you steamed it
Jun 18 2010 1:03PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
okay, so where the two pieces come together, in the tranistion, i put a 2x2, and got like 1/4in plywood and just kneeled on it to bend it and screwed it in
Jun 18 2010 3:36PM
0 0
profile picture
eddy9
Posts: 383 - Karma: 216
How long wre the two by fours you got?
Jun 20 2010 7:57AM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
just get 10ft and you'll be set
Jun 20 2010 11:25AM
0 0
profile picture
gabe.
Posts: 1891 - Karma: 47
8ft I think
Jun 20 2010 7:39PM
0 0
profile picture
*brian
Posts: 189 - Karma: 29
i'll have a clip up tonight
Jun 22 2010 12:45PM
0 0
profile picture
Mogwai.
Posts: 501 - Karma: 29
id like to see an edit of this. $65? nice!
Jun 24 2010 1:38AM
0 0
profile picture
eddy9
Posts: 383 - Karma: 216
Hopefully I'l be abble to make one soon need permision from parents
Jun 24 2010 8:31AM
0 0
profile picture
[-mvee-]
Posts: 1713 - Karma: 10
i cant see the pic you posted ?! : /
Jun 24 2010 8:16PM
0 0
All times are Eastern (-4)