A stock Photo (of the ski you want.)
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
I just put a tiny layer of glue on the unprinted side of one of the ski's halves then put the other half on.
You get a sandwhich:
photopaper with topsheet print
photopaper with base print
If you use 260gr photopaper it will be pretty strong.
It'sone of the thickest.
You can try with something else but this photopaper is not from canon/namebrand so it's pretty cheap: 3 euro for 20 sheets
As for the bindings c&p frm a post of mefrom the big topic:
If you wanna make a binding that would be nondestructif on the ski I would get some photopaper and make like a cilinder/rin out of it for your finger, and then make U shape out of photopaper. and slide the cilinder ring over it and glue together, then you can just slide the skis in the slot you create and take the bindings on/off when you want.
Sorry if it's not really clear what I mean.
I just made his really quikly to show yu what I mean: