Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

How to demount sth16s?

profile picture
skihood
Posts: 903 - Karma: 154
Help? I cant seem to get the heel piece off? what should i do?

thanks
jr
Feb 13 2010 3:50PM
0 0
profile picture
summersover
Posts: 5777 - Karma: 233
from what i remember you need to unscrew the brake first then the other four screws
be sure to take your time and not strip the screws, ski screws are almost always Posidriv meaning a Phillips head may not get all the torque you need. Patience is key
Feb 13 2010 3:56PM
0 0
profile picture
PhuzzyWuzzy
Posts: 358 - Karma: 82
I just had a pair of bindings dismounted by a tech at a local shop for $6.  It took under 5 minutes.  Unless you have a #3 Pozidriv screwdriver on hand, bring them to a shop. 
Feb 15 2010 2:46PM
0 0
profile picture
ripcity
Posts: 85 - Karma: 36
definitely helps if you have a pozi screwdriver, but you can do it with a philips. Has to be a fairly long screwdriver so you can reach the screws around the heel piece without the handle being in the way. Unscrew the brake piece that has one screw in the middle, it will expose the screws underneath. hope that helps.
Feb 15 2010 2:56PM
0 0
All times are Eastern (-4)