Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bindings making a clicking sound

profile picture
Bill2337
Posts: 131 - Karma: 10
I just got a new pair of the K2 Extremes and I got the Marker Griffon 12 Bindings on them, I noticed yesterday in the park right under the toe of my boot was making a clicking sound when I put pressure on it, is this normal?


Thanks, Bill
Jan 18 2010 1:50PM
0 0
profile picture
I_Am_Mod
Posts: 13214 - Karma: 3,753
i don't think that's normal

get it in a shop and ask them to check the forward pressure
otherwise check whether the toepiece is correctly mounted and see if its completely screwed against the skis topsheet....

also check your skiboots: are they worn out around the tip?
Jan 18 2010 1:55PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
The boot tips are in good shape and are not worn out, also it was only happening on the right ski, also it only happened if there was no snow under the binding part of the ski. I dont know if that may of caused it or not
Jan 18 2010 2:01PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
is it clicking or creaking? cuz i remember some people had issues with certain boots making like a creaking squeaking noise in those binders. something about plastic on plastic or whatever
Jan 18 2010 4:23PM
0 0
profile picture
effehz
Posts: 193 - Karma: 10
marker is crap get something else preferrably look
Jan 18 2010 4:37PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Its more of a clicking Ben. but I think I might of found what is making the sound. There is a piece of plastic with a little sheet of metal that is right where the boots goes and if you push it one way or the other way and let go it makes a clicking sound I may be sliding it when I put pressure on it I dont know if thats it or not though
Jan 18 2010 6:46PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
your afd? that shouldnt be moving unless you are popping out of the ski
Jan 18 2010 6:57PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Its right under where the toe of your boot goes not sure if thats the afd
Jan 18 2010 7:04PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
Click for larger image

the grey thing at the bottom?
Jan 18 2010 7:09PM
0 0
profile picture
Jimmy.
Posts: 2888 - Karma: 27
i noticed my griffons creaking for the first time yesterday.
Jan 18 2010 7:09PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Yea Ben it looks just like that but if I push on it side to side it will move and then go back into place as soon as I take my finger off of it
Jan 18 2010 7:13PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
yeah thats your afd, its what allows your toe to twist out in that sort of fall. but that really shouldnt be moving while your skiing.
Jan 18 2010 7:15PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Do you think I should have my ski shop look at it? or is there something I could do at my house that could fix it?
Jan 18 2010 7:16PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
id probably have a shop look at it. they most likely wont charge you unless they actually have to fix something.
Jan 18 2010 7:18PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Ok thanks, but the AFD should be able to move but shouldn't while im actually skiing?
Jan 18 2010 7:20PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
yeah, thats part of what helps your toe twist out in the event of a fall of that nature. but while you are just skiing around, your toe should be locked in.
Jan 18 2010 7:21PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Ok, Thanks a ton Ben
Jan 18 2010 7:22PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
no problem. post up what the shop says, im quite curious what it is lol
Jan 18 2010 7:23PM
0 0
profile picture
Bill2337
Posts: 131 - Karma: 10
Ok will do
Jan 18 2010 7:24PM
0 0
profile picture
bt@509
Posts: 327 - Karma: 30
take em of and return em if you can. markers are a scary binding. i work in a shop and we test a lot of markers that test out fine but when the ppl ski em they turn right out of em on 12. lol. get the looks they are awesome. px12 or 18 or whatever you want your din at but looks are way safer.
Jan 18 2010 11:41PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
old markers did that. this new jester etc line is not bad at all
Jan 18 2010 11:52PM
0 0
profile picture
bt@509
Posts: 327 - Karma: 30
yeah we only saw a couple of the jester duke lineup do that. but i saw about 5 people last season crack the heel piece off the ski. they didn't pull it out but they cracked it off lol. it was really wierd but yeah i wanted a pair but have been too scared of ruining em and getting hurt again. i broke my back on some rossis and won't go near em. even tho look is the same binding i just trust em more.
Jan 18 2010 11:57PM
0 0
profile picture
J.DUKE
Posts: 1233 - Karma: 38
they creak cuz its a mostly plastic binder. mine do it. if you start hearing a popping noise as youre skating then its your heel and toes on ur boot  being too worn and moving inside the toe and heels pieces of your binders
Jan 19 2010 1:20AM
0 0
profile picture
fugitive124
Posts: 14 - Karma: 14

yea

i had the marker free 11.0 on k2 fugitives

it looked nice.... until i had to get it remounted for new pairs of boots

turns out i broke the toe plate in half

i also broke both the brakes on the bindings

i'm not trusting markers anymore

went out and bought myself some looks!! :D

Jan 21 2010 12:19AM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
the marker free was a shitty binding. the jester/griffon etc lineup is totally different.
Jan 21 2010 12:46AM
0 0
profile picture
rozboon
Posts: 1642 - Karma: 868
You can't even compare the Royal line or whatever it's called with the old M series.
My M binding had brakes made of wet toilet paper and seemed to require a hideous amount of forward pressure to not fall off my feet at inopportune times.

Now there's 4 of us in my crew that ski on the new Markers, 1 Griffon, 2 Jesters and 1 Griffon Schizo. Haven't had a single problem except the schizo's won't stay in one place.

As for the original question... my Jesters make crackly sounds when I pop hard or tail press... it's REALLY offputting but otherwise doesn't seem to have caused any problems that I know of.
Jan 21 2010 3:43AM
0 0
profile picture
yeahitsdave
Posts: 1315 - Karma: 10
after a season of use, my jesters set at a 12 are testing out at a 8.5 and a 9 (right and left toes, heels are testing at like a 10, 10.5, i forget exactly). it somewhat scares me how soft the system is getting already.
Jan 21 2010 8:54AM
0 0
profile picture
skisk8ride19
Posts: 299 - Karma: 82
Most likely you have a mechanical problem in the AFD. With Look/Rossi bindings when that happens the spring has disloged, but the afd will still be useable. I would replace the afd, it's a lot cheaper than a blown ACL.
Jan 21 2010 12:15PM
0 0
profile picture
Sactown83
Posts: 188 - Karma: 10
This is actually a known problem with previous year Griffons and Jesters paired up with Dalbellos and Full Tilts.  DIN, which is the standardization of heel and toe lugs and other boot to binding dimensions, allows for a couple different toe heights.  Dalbello Kryptons and Full Tilts used a slightly lower toe height, and on older model Griffons/Jesters the AFD was slightly too low.  Marker is aware of this problem and will actually send you out an AFD that is a couple mm higher to compensate for this.


Jan 21 2010 4:23PM
0 0
profile picture
Ben.
Posts: 21463 - Karma: 683
aha. that explains it.
Jan 21 2010 4:25PM
0 0
All times are Eastern (-4)