Member of the Month

DominatorJacques
December, 2021

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

So im making a box/rail

profile picture
Gstrong
Posts: 4776 - Karma: 510

ive basicly got a plan but what kind of wood should i use? what should i use on top of the rail? and where can i buy it?

K+++ for help

Jan 13 2010 3:13PM 0 0
profile picture
fratskier69
Posts: 1865 - Karma: 1,245
well just use norma cedar, cause its cheap and good for teh outdoors.
use plywood for teh side (if you want)
and if you arent using metal, use those really small pvc pipes, but liek 3 together, and screw them on from the bottom
teh best would actually be puckboard (teh slippy plastic), you can buy it from some plastic stores
the rest you can get from any store like home depot, or rona, etc.
Jan 13 2010 3:17PM 0 0
profile picture
fragglemuffin
Posts: 3312 - Karma: 441
basically you can just use normal 2x4s for the frame, and PVC pipes for the sliding surface, but if you want to make a real legit box you should use HDPE as the sliding surface...they sell it at usplastics.com but it's kinda expensive.  If you choose get it, get 1/4" thick and countersink the screw holes when you put it on the box. 

PS: join the build-a-jib cult
Jan 13 2010 3:19PM 0 0
profile picture
cultrara
Posts: 5132 - Karma: 46,599
Id use pressure-treared wood cus it lasts longer in the elements
Jan 13 2010 3:20PM 0 0
profile picture
Gstrong
Posts: 4776 - Karma: 510
oh and what size should i buy the hdpe
Jan 13 2010 3:49PM 0 0
profile picture
omIV
Posts: 1950 - Karma: 306
.
Jan 13 2010 3:51PM 0 0
profile picture
Justin.B
Posts: 2257 - Karma: 721
i made a box and used uhmw on top and works amazing. pm me if u want pics
Jan 13 2010 4:30PM 0 0
profile picture
yuck
Posts: 8384 - Karma: 2,087
/ thread
Jan 13 2010 4:41PM 0 0
profile picture
Stockie.
Posts: 32 - Karma: 18
i wouldnt use hdpe because someone i know used it and said it cracks and wasnt worth it, use pvc and drill up from the bottom, it really cheap and slides really well.  Also make sure that the middle is supported enough so it doesnt break
Jan 13 2010 5:31PM 0 0
All times are Eastern (-5)