Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Building a Box???

profile picture
axtothemax
Posts: 35 - Karma: 15
I was looking at some videos on different ways to build a box and I noticed that everyone was using a different kind of material for the plastic on the top.

Has anyone on here built one or at least know what I should buy if I'm trying to build one?
Jan 4 2010 3:26AM
0 0
profile picture
Candy
Posts: 1051 - Karma: 176
Here you go kind sir:

https://newschoolers.com/web/members/cultforum/cat_id/1453/

and yes, clicky is not working for me right now. Just copy/paste.
Jan 4 2010 3:32AM
0 0
profile picture
Evilchris
Posts: 2090 - Karma: 43
join the build a jib cult. but PVC is the ultimate low budget sliding surface
Jan 4 2010 10:44AM
0 0
profile picture
axtothemax
Posts: 35 - Karma: 15
alright... trying to get an invite to the build a jib cult but besides that thanks for your help... is home depot probably the best place to get pvc and other shit?
Jan 8 2010 8:07PM
0 0
profile picture
Dr.Brown
Posts: 588 - Karma: 21
yup, get the Grey PVC. It'll cost you a bit more, but it's all worth it. It's used for electric wiring i think, and it's a bit more dense. Anyways, you can feel the difference if you hold the white PVC pipe in one hand, and the grey one in the other and start compressing both.

I used 3 3/4" Grey PVC on my rail. They we're all drilled in the 2x4. The whole project cost me 38$ for a 8 foot rail (it's a bit short). My plan is to make another 6 or 8 foot rail to extend it.

Here's a picture:

Click for larger image
Jan 8 2010 8:22PM
0 0
profile picture
WVskiing
Posts: 3007 - Karma: 1,948
i used HDPE, 1/2 inch thick. its a bit pricey but works great



Click for larger image
Click for larger image
Jan 8 2010 8:46PM
0 0
profile picture
jfletcher
Posts: 1208 - Karma: 188
i used lexan, and it worked relatively well
Jan 8 2010 8:47PM
0 0
profile picture
Dr.Brown
Posts: 588 - Karma: 21
How much did you pay for the HDPE?
Jan 8 2010 8:54PM
0 0
profile picture
WVskiing
Posts: 3007 - Karma: 1,948
1/2" 4'x8' sheet $200ish
Jan 8 2010 8:56PM
0 0
profile picture
iannelson
Posts: 321 - Karma: 43

Expensive! That shit had better be fucking amazing.

Jan 8 2010 11:23PM
0 0
profile picture
garrets
Posts: 1447 - Karma: 60
agreed
Jan 8 2010 11:29PM
0 0
profile picture
The_Future
Posts: 1418 - Karma: 607
Don't use black plastics... it will warp and bubble.  If you really want high quality make sure you get white.
Jan 8 2010 11:44PM
0 0
profile picture
jpmoneyshot
Posts: 81 - Karma: 11
Cheap easy way to make a box is to use a bunch on small pvc pipes.  I think I used half inch last winter when I had space for  a backyard rail.  They will break over time but it is real cheap ($1.50) to replace each piece.  Don't bother to do the whole width of the box just a couple in the middle and two on each outside.  I think I have pics of mine from last year in my profile.
Jan 9 2010 12:13AM
0 0
profile picture
axtothemax
Posts: 35 - Karma: 15
awesome... thanks for all the help
Jan 9 2010 10:50PM
0 0
profile picture
kronickrew
Posts: 1013 - Karma: 32
we used some ply wood we found in my garage and a few cutting boards from my dads restaraunt
Jan 10 2010 1:27AM
0 0
profile picture
steezilicious
Posts: 130 - Karma: 15
i found a table some on was throwing away and put pvc on it. works great
Jan 10 2010 2:34PM
0 0
All times are Eastern (-4)