Red Bull Unrailistic | LIVE Broadcast

Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Skate Park Ledge

profile picture
asian_andy
Posts: 830 - Karma: 61
My friends and i want to get some session/edit on a ledge at my local skatepark.

http://concretedisciples.com/skateparksdb/skateparks_display.php?id=2449

Its a concrete flat-down that has metal on the sides and a slick top from all the cess slides etc.
Will this ledge work?? and abuot 10 feet away behind it is a picnic table. we wanna drop in from that. what can we use to drop in from the picnic table?? (maybe a later? ply wood?)
+kkkk for help
Dec 22 2009 1:13PM
0 0
profile picture
Parrish
Posts: 8695 - Karma: 1,007
What are you guys using for like a landing and stuff. You got any snow or are you using turf? If you got snow, possibly take some plywood (thick enough to hold weight) and use that against the table I guess, maybe even turn the table so when you lean the plywood the bench is there to support it. Cover that with snow, add a little snow for a landing. And you golden.
Dec 22 2009 1:25PM
0 0
profile picture
asian_andy
Posts: 830 - Karma: 61
o sorry i forgot to mention that we have about 5 inch of snow on the ground. would metal ladder drop in work?
Dec 22 2009 1:28PM
0 0
profile picture
Parrish
Posts: 8695 - Karma: 1,007
That would have been an important detail. I would just use the snow and make a drop from the picnic table. Why waste the time in bringing a ladder or money on buying plywood. The snow is free and there is probably alot of it due to the fact that its a skatepark that nobody wants to shovel.
Dec 22 2009 1:32PM
0 0
profile picture
asian_andy
Posts: 830 - Karma: 61
true.
Dec 22 2009 1:51PM
0 0
profile picture
Newschool_Pope
Posts: 2473 - Karma: 267
that ledge looks sick for some tail or nose presses.
Dec 22 2009 2:11PM
0 0
profile picture
Mr.Huck
Posts: 6096 - Karma: 14,893
AA, I don't think an aluminum ladder would be fast enough by itself, but if you attached some of this to the top of the ladder to make a sliding surface, it should work. 

http://www.lowes.com/lowes/lkn?action=productDetail&productId=94462-81826-SLW-48&lpage=none

This stuff is really fast.  When you use it, your drop in does not have to be as tall or as steep so it should work for picnic table height.  They usually sell it in half sheets too.  A 2 x 8 sheet should lay about perfect on an aluminum step ladder.  I'd use zip ties to attach it to the ladder.  Should survive the session. 
Dec 22 2009 2:37PM
0 0
profile picture
lifesadream
Posts: 161 - Karma: 145
i live really close to that skate park. im definitely gunna hit that soon.
Dec 22 2009 2:56PM
0 0
profile picture
asian_andy
Posts: 830 - Karma: 61
go today. were guna be there soon.
Dec 22 2009 3:03PM
0 0
All times are Eastern (-4)