Member of the Month

PartyBullshiit
March, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Can you adjust the Rossignol FKS?

profile picture
Meggadoomer
Posts: 56 - Karma: 10
if i got another boot, would i have to remount the bindings?
Oct 17 2009 12:50PM
0 0
profile picture
fouldsys
Posts: 7404 - Karma: 39
there is technically 6mm of play. you can usually get a little more depending on how they were mounted the first time. whats your old bsl and what would be the new one?
Oct 17 2009 12:54PM
0 0
profile picture
no_steeze
Posts: 23992 - Karma: 4,270
depends on the bsl difference, there's about a cm of adjustment overall so it depends on how big the new bsl is and where your bindings are originally mounted relative to the wormscrews

but you can adjust them by closing the binding and turning the wormscrews on either side of the heel
Oct 17 2009 12:55PM
0 0
profile picture
Meggadoomer
Posts: 56 - Karma: 10
ok thanks, ya i was just wondering if it was possible to adjust them
Oct 17 2009 1:01PM
0 0
profile picture
bibs_skibum
Posts: 4462 - Karma: 449
how do you adjust forward pressure on FKS?
Oct 17 2009 1:10PM
0 0
profile picture
bibs_skibum
Posts: 4462 - Karma: 449
fuck... idiot.  I meant how do you check forward pressure.  Dammit
Oct 17 2009 1:10PM
0 0
profile picture
fragglemuffin
Posts: 3312 - Karma: 444
on the heelpiece, look at the little white slider behind the turntable...there are two small black notches, one on either side of the white thing, and the edge of the white slider should line up with the black notches (i think)
Oct 17 2009 1:48PM
0 0
profile picture
fouldsys
Posts: 7404 - Karma: 39
yes the back of the tab should line up with the black notches when the boot is in the binding
Oct 17 2009 1:57PM
0 0
profile picture
smokeyjack2000
Posts: 154 - Karma: 60
Don't want to hijack this thread but how do you increase/decrease the forward pressure to get the tabs in line with the white bit?
Oct 17 2009 3:31PM
0 0
profile picture
TimmyK
Posts: 779 - Karma: 15
To get correct forward pressure you adjust the wormscrews until when you slide your finger from one black notch across the white forward pressure tab to the opposite black tab and you feel that there is nothing but a straight line.  Having adjusted many i find this the most effective method.   Line of sight adjustment could be incorrect as the turntable heels requires a precise forward pressure. 
Oct 17 2009 5:42PM
0 0
profile picture
Meggadoomer
Posts: 56 - Karma: 10
thanks, i just ordered them. i cant wait to put em on my anthems
Oct 17 2009 7:56PM
0 0
profile picture
bibs_skibum
Posts: 4462 - Karma: 449
new fks forward pressure question. I adjusted them as small as they would go and the white tab isnt perfectly strait with the black knotches. Its damn close but not perfect. So i was wondering, will the binding release properly when its adjusted to the smallest it will go? I know that youre only supposed to go between the two little knotches on the wormscrews but i went the whole way. And will this little bit of non-perfect forward pressure screw me over? I'll post pics if anybodys interested
Nov 5 2009 12:23PM
0 0
profile picture
DHogg
Posts: 3462 - Karma: 235
^As small as they go is ok. The issue is really when you are on the other end and they are maxed out as big as they go. FKS fwd pressure isn't really exact as so as long as your pretty close you should be good. You should also check it pretty regularly.
Nov 5 2009 3:14PM
0 0
profile picture
bibs_skibum
Posts: 4462 - Karma: 449
sweet man thanks. Enjoy some karma
Nov 5 2009 6:04PM
0 0
All times are Eastern (-4)