Member of the Month

JalmarKalmar
April, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Water ramp

profile picture
Lil_Flip
Posts: 83 - Karma: -14
ok so for next summer i want to build a water ramp into a lake/pond. first off how should i build it? 2nd what should i use for the surface for cheapest outcome? how deep does the water have to be were i land?
Oct 12 2009 10:11PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
it doesn't matter, but if it's flat and even water, it's going to hurt, compared to if it was like being bubbled.
Oct 13 2009 12:09PM
0 0
profile picture
stickerman
Posts: 2043 - Karma: 147
yea, its gonna hurt if you dont have it bubbled.  but if you land right then it wont hurt at all.  like if you just land on your bases.  but if you land on your back or hip then you might be the next tanner hall after chads but with your hip or back injury
Nov 26 2009 8:51PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
actually i just thought of something, get some hose that you could hook up to an air compressor and drop that line to the bottom, cut holes in it to let air escape, and have a air release on the compressor and you'll have your water bubbling!
Nov 27 2009 7:52PM
0 0
profile picture
HeathR
Posts: 4357 - Karma: 1,379
im pretty sure those bubbles who be too small to effect the surface tension.
Nov 28 2009 6:14PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
wouldn't that depend how much air you're pumping through there?
Nov 28 2009 11:00PM
0 0
profile picture
HeathR
Posts: 4357 - Karma: 1,379
i guess if you had a big enough compressor it could work.
Nov 29 2009 9:59AM
0 0
profile picture
the.cheat
Posts: 2859 - Karma: 171
would having a hose with a sprayer attachment spraying on it work? pointed up so it like rains on the pond sort of
Mar 9 2010 7:59PM
0 0
profile picture
i0z
Posts: 896 - Karma: 40
has anyone ever built one off their dock and towed into it with a boat? i think that would be epic
Mar 14 2010 11:12PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
okay well obviously you could build the jump, the only question is, can you hit it with snowskis in the water? like can you get up and everything and how do you make the set up with the skis.
Mar 15 2010 8:28PM
0 0
profile picture
Jwenz
Posts: 8893 - Karma: 7,633
if you have to ask the questions you are askin gyou should not be building one. go to one and figure out what you need then go to town. a water ramp is no amature summer setup adventure
Mar 15 2010 10:38PM
0 0
profile picture
HangThePope
Posts: 749 - Karma: 19
I was actually contemplating building a water ramp like that this summer.
Mar 16 2010 1:15PM
0 0
profile picture
i0z
Posts: 896 - Karma: 40
yeah just build like a carpeted inrun. i just dont know how deep the water will be after my dock since i got a new one.
Mar 16 2010 1:38PM
0 0
profile picture
stickerman
Posts: 2043 - Karma: 147

i did this last year and it was DOPE!  what i did was i have one of those plastic pvc docks (jetdock.com) and it is like a good 50ft long.  so i got my waverunner and tied a wakeboard rope to that.  built a jump and bobs your uncle.

my neighbor has an actual waterski jump that we use all of the time, with snow skis.  only problem is if your bindings release, your skis will sink right to the bottom.  so crank up that din!

Mar 17 2010 4:20PM
0 0
profile picture
i0z
Posts: 896 - Karma: 40
i was gonna hook up some snowboard leashes so my skis dont sink lol
Mar 17 2010 6:28PM
0 0
profile picture
the.cheat
Posts: 2859 - Karma: 171
glue that blue or pink insulation foam to your skis with silicone glue for the summer mabye? the leashes seem like a bad idea if its deep, think about swimming with skis around your ankles..
Mar 18 2010 11:22PM
0 0
profile picture
JackJohnSki
Posts: 949 - Karma: 1,944
but if you're hitting a jump, what would i matter, you're close to shore and you'd be able stand up with only swimming like what 15ft? leashes seem like a good idea, i'm going to make one this summer
Mar 23 2010 10:50AM
0 0
profile picture
musick13
Posts: 913 - Karma: 44
I think that if you ripped up a jet ski engine, and mounted it under where you land, then you might have a legit, non-painful setup.

Or not, make your jump with a huge lip, like vertical huge, and then you might be able to mount the engine right under the take-off.
Mar 26 2010 8:10PM
0 0
profile picture
ski_monster
Posts: 64 - Karma: 10
haha yea i just used a fourwheeler to get the speed, but i also live in the middle of nowhere, it is epic
Apr 15 2010 9:31PM
0 0
profile picture
remb
Posts: 49 - Karma: 48

that plastic latus the white stuff its like 30 dollars for a 4x8 sheet

May 14 2010 10:55AM
0 0
All times are Eastern (-4)